Recent content by chazk1

Thanks Kevin, that's what I wanted.

i apologise in advance as new to telecomms stuff. is it possible to list all users or stations that have console permissions allocated/enabled. checking our setup i see cos 12 has this enabled but i want to see who has ability to record announcements.

Hi, I'm using a network management product that allows you to run a script or batch file on receipt of snmp traps. Anyone out there suggest an snmp trap (oid) that can be used to instigate my backup script when my router's config has been changed ? Using NetCrunch NMS and Cisco Routers. Thanks.

Anyone out there know what the mib/oid identifier would be to monitor the 'reliability 255/255' reading on a cisco router or switch interface ? Thanks...

Patrick, Would this script only download for a specific router or many routers? Do you have a copy of your config where I can see where to add the details you mentioned ? Cheers...

Reply from our server team: There is a bug with the DHCP service that when the server is rebooted the scopes go back into a Superscope config which prevents ip addresses from being corrected if a machine moves floors. They are looking for a long term fix, maybe using a core switch as a DHCP...

Reply to last 2 messages. The DHCP server is on a separate vlan - lets say vlan 2 Yes, other pcs on same vlan are obtaining addresses. IP Helper address of dhcp server has been configured for each vlan. Spanning-tree portfast already enabled on each port. I'm checking with the server team re...

Yes thanks, released, renewed and rebooted.Still picks up IP address it obtained when connected to the previous LAN.

I have a couple of 12-port fibre Cisco WS-C3750G-12S-E switches which have Catalyst 3550 clusters patched into them. Each 3550 Cluster has been allocated a seperate Vlan. I have physically moved 6 x PCs, which use DHCP to obtain their IP addresses, from one cluster (vlan 10) to another cluster...

Yes. See output below. Diagnostic events (storage for 500 events, 3 events recorded Event Type (ET): I - Info, W - Warning, E - Error Time Stamp ET [Card] Event Message ------------------ -- -------------------------------------- 09/01 10:26:37.091 I [5] Diagnostics Passed 09/01...

I have a WS-X6748-GE-TX module in slot 1 on a 6509. Slots 5 and 6 have Sup720's. All ports on this card except port 1 work in slot 1. All ports including port 1 work when card inserted in slot 2. Have swapped the 48-port card out with new/spare but still experiencing same symptoms. Have even...

Thanks Rob. It all seems pretty clear but I'm having problem with the uplink port. This is port 1 on the BayStack. I create the VLANs 10 and 20. I go into 'VLAN Port Configuration' and here is what I see: Port: [ 1 ] Filter Tagged Frames...

Cogen..Port 1 on each BayStack will be patched using Copper to one of the ports on the Catalyst 3750. An example of how the Cat port is configured: interface GigabitEthernet1/0/4 description SUTMAUS1E switchport access vlan 20 switchport trunk encapsulation dot1q duplex full speed 100...

I have a Cisco core (dual 3750 switches) which have user vlans configured. Lets say VLAN 10 and VLAN 20 I have a number of Nortel BayStack 450-24T switches (access switches)which are to be used by client PCs. How do I configure the Baystack ports to become members of the correct VLAN. Where...

I have a Cisco core (dual 3750 switches) which have user vlans configured. Lets say VLAN 10 and VLAN 20 I have a number of Nortel BayStack 450-24T switches (access switches)which are to be used by client PCs. How do I configure the Baystack ports to become members of the correct VLAN. Where...