Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Centit

  1. Centit

    Find IP OFFICE Hardware Version

    Thanks all I looked at the unit in the rack from the back and it says IP OFFICE 500 on the sticker. It also has a CF card slot and no SD slot. So I am assuming its the original V1. Does anyone know if this will still support V8 of the IP Office software? I know the new IP Pro Voicemail card is...
  2. Centit

    Find IP OFFICE Hardware Version

    Its the IP OFFICE 500 sorry [dazed]
  3. Centit

    Find IP OFFICE Hardware Version

    Can anyone please tell me if there is a simple way to find out if the IP OFFICE is V2 or not? I looked in IP Office Manager but I am not sure where I should be looking. Thanks
  4. Centit

    VM Pro version 7 upgrade Problems

    I think I have an older backup of the .mdb , but I didn't do a recent one. Thats my mistake. Even though the document said you didn't have to do it anymore, I should have done it anyway. has anyone used the AutoBackup on a schedule with the new version..
  5. Centit

    VM Pro version 7 upgrade Problems

    Hello all, I did my first Version 7 update from version 4.2 last night. I read in the installation guide that you simply put in Cd and click run. once it ask to update to Version 7 you click yes and let her go. The first time I did this I had no errors on install but then when I tried to open...
  6. Centit

    NightService button and Time Profile

    Thanks everyone, So I have to make sure the user pushes the button in the morning if they Force Night Service the day before. I was hoping the TIme Profile would some how override or reset the button status the following Day. Oh well, I guess I will have to put it on a few peoples phones...
  7. Centit

    NightService button and Time Profile

    I have programmed a button for a users phone that sets a hunt group to night service and falls back to a hunt group with a night ringer in it.I have also applied a Time Profile for the same hunt group to automaticly put it into Night Service. Everything works perfectly. My Question is, if I...
  8. Centit

    Dial delay time

    I had a delay problem at a site installed by another user, it delayed on the digits displayed on the phone and the redial said incompatible . It ended up being a problem with the Dialing out 9 prefix. I found that when the line group ID was set to the default group 0 the calls where very...
  9. Centit

    Twinning Call Flow Example

    well I designed call flow is designed so that sales reps can call in and turn it on or off by going through their own voicemail collect call flow. So the CLI does me no good when the users are at there own extension. Plus if they are in the office they can just use the twinning button on their...
  10. Centit

    Twinning Call Flow Example

    so $CLI will work even if I call from an outside line and go through voicemail collect?
  11. Centit

    Twinning Call Flow Example

    aarenot, you can change the default start points,but not everone of my users extensions have mobile twinning. Plus in order to use the module with any user you need to use a variable for that users extension. and seeing as we determined there is no system variable for current callers extension...
  12. Centit

    Twinning Call Flow Example

    Kyle, I was able to do it by adding a Generic action in the Collect call flow for each user. Then I set a Save:ext# and a go to the module. Then in the module I followed the example above and but replaced the extension number in the CFG: with $SAV and it enables and disables twinning. I put...
  13. Centit

    Twinning Call Flow Example

    Kevin, that could work but I have it set so that the call flow starts when the user logs into the IP Office voicemail system. This way they have to enter their extension and password. I want to point the User->username->Collect flow to the Twinning module. so if I collect voicemail remotely...
  14. Centit

    Twinning Call Flow Example

    This is very similar to my setup, but in this example its for a user with extension 203. Is there a variable that could be used in place of "203" so that this module could be used by other extension, ie ext 203, 204 ,205 etc.. without creating a separate module for each extension... thanks
  15. Centit

    Twinning Call Flow Example

    I have created a call flow for one user that enables and disables Mobile Twinning or collects voicemail through a menu prompt in the users Collect Call Flow. This is working with out problems. I would like to copy this setup to other users who have a twinning license. Is there any examples or...
See more

Part and Inventory Search

Back
Top