Recent content by ccnguy

I have 4 vm's running on a blade server. I noticed that I need 1 seperate backup device for each vm running. I would like to backup all 4 vm's in 1 night unattended. How can this be done? Do I need to purchase a seperate software package to do this, or can 1 backup drive backup all data on...

Can I backup all ESX partitions at the same time using 1 backup drive? Is there a tool that can help me do this? Any help here will be greatly appreciated.

I have 3 private addresses on 1 side of my nat router and 3 private addresses on the other side. I want to configure static nat on both sides of the router(nat going to inside and then nat going back again through router). Is this possible and what are the commands to achieve this? Thanks

I read that the Cisco 2600 router uses Data Compression AIM(Advanced Integration Module slot) which supports 8Mbps of compressed data throughput without imposing additional traffic latency. So hardware may be needed?

I want to dial into a remote router when the circuit fails. I have a modem hanging off the aux port on the remote router, and a router(not in production) with a modem attached to the aux as well. What would be the config on both to dial into the remote router from a router that is not attached...

Are there any kinds of data that this type of compression technique would not work well with? What are the disadvantages of using compression?

I want to enable compression on a T1 circuit between 2 routers - encap hdlc. Not sure whether to use stacker or predictor. Which one is usually used and where can I find the correct commands?

So if the main routers were covered by smartnet but the smaller one's were not because this is a hardware contract and who cares about the little guys then still an ios could not be downloaded for the smaller routers? Even if the smaller routers all had feature packs purchased for them? Then...

Hello, Need to stop a certain ip from getting to internet and the internet from getting to this ip. This is what I have: access-list 100 deny <internet ip> 0.0.0.0 <internal ip> access-group 100 in 101 deny <internal ip> 0.0.0.0 <internet ip> access-group 101 out Am I barking up the right...

Hello, I have just set up a new lab and am looking for a newer version of ios for a 2620 router. I have a friend in the industry that says that I need to purchase a license to download ios. Is this true? I read that if you have say 100 routers and you have purchased the feature pack for them...

Hello, I have a Netware NOS with AS/400, e-mail and numerous other applications that require a username and password. I am looking to compare products that would bring these different databases together so to have users just enter 1 username and password to authenticate for all apps. Can...

If anyone out there has sucessfully deployed NT 4.0 or Windows 2000 Service packs using zenworks, please give some insight and direct me to the correct procedure(site) to install correctly. Thanks

Hello, What's the difference between Red Hat Enterprise Linux ES Standard Edition and Red Hat Professional? The later is alot cheaper, and we are going to make the server a proxy server with apache, samba, squid and ldap. Do we really need to purchase Red Hat Enterprise Linux ES Standard...

Hello, I currently have NT(ie6) users logging into proxy and accessing their home page on the internet. But we are going to w2k and some test users are now having the problem of their home page timing out(with ie6) and having to click on refresh or home to bring it up - after they do this they...

I don't want to use Grp Policies I need to use registry settings. I have created the key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindoesUpdate\au but this entry did not work. I then created HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\WUServer and...