Recent content by cathyd

Thanks!

Does anyone know what type you use when programming a 9611 set? Thanks!

Thank you so much!! Have a great day, Cathy

I was remotely working on a new 8300 when my laptop inexplicably rebooted. When I went back in and tried to change the vector I was working on, it told me my login had the data locked. I logged off, disconnected and went back in again and had the same problem. I then went in as dadmin and...

I have definitely done this before, your programming looks like it should work. The only thing that you might try, is on page two or three of the hunt group, there is a lwc reception field. If it is set to none, try setting it to audix. I had a problem with agent login's message waitings and...

estallin: they are 6416 sets, but thanks. CL: The lwc reception field was set to spe instead of audix. Thanks for the help, I appreciate it. Cathy

CL Is the only field I need to set the: AUDIX Name for Messaging: audix? Cathy

Greetings, I have agent log-in id's with voice mail, and I wanted the message waiting lamp to light when there are messages in that mailbox. I changed the system par features, page 11, Message Waiting Lamp Indicates Status For: loginID The lights are still not going on, am I missing...

Thank you, Thank you, a million times thank you!!! I really appreciate your help. Cathy

Greetings, I had ASA R1.9.06 installed and recently updated to R2.0.12. When I have upgraded in the past, all the switch and voicemail dialin info remained. This time however, it deleted all of them. Does anyone have any suggestions? I had well over 100 systems identified in it and am...

Here is something else you can do to use one mailbox for two extensions. In the Intuity, create a mailbox on the primary extension. Then go to "ch auto r", which will bring up a table. In the first column (incoming dialed number) put in the secondary extension number. Then in the...

The limit is 32. As far as I know there is no way around it.

The first thing you need to do is verify the call forwarding code by entering, "disp fea". On the first page, midway down you will see a call forward all calls activation code and to the right of that same line a deactivation code. These are usually *2 to activate and #2 to...

If this is something you want the user to be able to activate & deactivate themselves here is an easier way to do it. Check what COS the station is currently using by doing "disp st xxxx". Find an unused COS number and type in "ch cos". The screen will come up with the COS...

You can call the Definity help line at 800-242-2121 and for a mere $500 they will be happy to reset it. You could also try cust, custpw1.