Recent content by caswcu

I have a xc1255 and when the paper comes out after a copy it is wrinkled. I have tried removing the drum and making a copy without it installed and get the same result. Anything else to try? Thanks

I was just looking at doing this yesterday. this article seems to be complete http://www.msexchange.org/tutorials/Implementing-Two-Node-Cluster-Windows-2003-Enterprise.html

we have a merlin legend phone system (408 board wiith mlx-10p phones ) with inuity audix. Often someone will enter an extension into the AA ( auto attendant ) and it will transfer them to a totally different extension. I have wittness this myself. I checked the configurations of the phones...

thanks for your assistance. I was going remove dhcp on my desktop and check it out.

here she is: Building configuration... : Saved : PIX Version 6.2(2) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password X/X encrypted passwd X/X encrypted hostname hostname domain-name hostname.com clock timezone clock summer-time EDT recurring fixup protocol...

nope once that domain has been resolved its fine... ill post the pix config on monday

i do have a windows 2003 dns server. thing is on another network I have outside of here the dns queries for new entries are rapid

ok this time I found something that hasnt been queried yet tapplastics.com DNS request timed out timeout was 2 seconds *** Request to vnsc-pri.sys.gtei.net timed-out <SO I QUERY IT AGAIN> server: vnsc-pri.sys.gtei.net Address : 4.2.2.1 Non-authoritative answer Name: tapplastics.com...

I have changed them around. initally its fast then slows down..

ok I did jaguar.com DNS request timed out timeout was 2 seconds Non-authoritive answer name: jaguar.com address: 138.8.154.18

yes the packets are making it out. when ever it does a DNS lookup, ping,nslookup to a new domain it is slow 5 seconds delay before a result. for instance if I go to dos and type ping <newdomain.com> there is a 5 second delay before it shows the ip address. or if I do an nslookup on a new...

here you go.. what do you think so far? anything about the MTU I said before? 14:28:16.056668 192.168.1.2.1033 > 216.175.203.50.53: udp 38(fragment-packet) 14:28:16.123223 216.175.203.50.53 > 192.168.1.2.1033: udp 291(fragment-packet) 14:28:16.227542 192.168.1.2.1033 > 216.175.203.50.53...

sorry have to triple post myself. I inital suspected this might be a mTU issue with the pix 506e. I tested my mtu via my pc and see the number should be around 1372. right now my inside and outside mtu is 1500 Thans

i just took out the invalid options. here is a capture the 192.168.1.2 is my windows 2003 server. 12:35:32.860093 192.168.1.2.1033 > 216.175.203.50.53: udp 44(fragment-packet) 12:35:51.048154 192.168.1.2.1033 > 216.175.203.50.53: udp 31(fragment-packet) 12:35:53.278839 192.168.1.2.1033 >...

circular-buffer is an invalid option