Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by casp1616

  1. casp1616

    WHY?

    Hi, everybody. I need some help from you. I have a central md110 erickson, I don´t know much about it. However, I am confused, some extensions goes to busy tone and I put the command: <SUSIP:DIR=514; STATUS INFORMATION AT 00:00:00 01JAN00 DIR TYPE TRAFFIC STATE/PTR LINE STATE/PTR DIV...
  2. casp1616

    Alarms

    parnum: this is the prinout: How can I interpret this? <LSBLI:LIM=1,DSU=2; LSBLI:LIM=1,DSU=2; SURE? (YES/NO) <YES EXECUTED DSU BOARD IS NOW BLOCKED BUT THERE MAY BE EXISTING TRAFFIC <LSFTI=LIM=1; SYNTAX ERROR <LSFTI:LIM=1; LSFTI:LIM=1; SURE? (YES/NO) <YES ORDERED <LSBLE:LIM=1,DSU=2; EXECUTED...
  3. casp1616

    Alarms

    Hi, everybody I need help for this issue, I have some alarms, that I don´t know how to interpret, but my telephony system goes down and some phones run out of tone for a while, then the phones have tone again. These are the alarms: CODE 283, CODE 100 AND CODE 38 <ALLOP:CODE=283; ALARM LOG...
  4. casp1616

    Line Lock

    Thanks for your help... It was really useful
  5. casp1616

    Line Lock

    Hi, everybody I have this extension <SUSIP:DIR=513; STATUS INFORMATION AT 00:00:00 01JAN00 DIR TYPE TRAFFIC STATE/PTR LINE STATE/PTR DIV STATE ADD INFO 513 ATS LINE LOCK #021F LINE LOCK #0386 END The line is locked. I already have restarted the board, I have...
  6. casp1616

    Analogs Telephone have busy tone

    Hi, everyone I need some help here, I don´t have expertice in MD110 PBX, but I have an issue that is some analogs telephone work fine, they receive calls ok, but at the moment for doing a call, the phone is busy, so I can´t do anything. I checked the board with WINFIOL, and I restarted and it...
  7. casp1616

    Cannot Log in via Telnet

    thanks for your help, i thought that yesterday and i desactivated the firewall of my antivirus and the windows s.o. and i couldn´t log in, but today i did it again then yes i could :S. But thank you, greetings
  8. casp1616

    Cannot Log in via Telnet

    Hi everyone, I have a question I formatted my computer recently, before i could access to the MD110 via telnet and now i cannot.I can do ping to the NIU board, but in the software, the next message is shown "Error: Cannot get host entry" and other thing that i see is in the bottom says: Port...
  9. casp1616

    Extension IP

    <IPEXP:DIR=ALL; IP EXTENSION DATA DIR IP ADDRESS RAS PORT CS PORT BACKUP POS PASSWORD 431 NOT REGISTERED - - - 529 10.0.1.15 1719 1720 - 546 NOT REGISTERED - -...
  10. casp1616

    Extension IP

    Hi, Everybody I need help. How can I make an extension IP in a central MD110. what is the procedure? thanks...
See more

Part and Inventory Search

Back
Top