Recent content by Carlitos71

I am moving from a Unix FTP server to a Windows 2012 FTP server and having a permissions issue. The regular ftp user should have access to the entire root of the drive. But I need special user to be isolated to his own directory and not see or change to any other directory. I seem to be able...

I've moved a physical server over to VMWare ESXi 5.1 using SCO 6.0 with MP4. For whatever reason, people are occasionally getting kicked out or are closing out their telnet session and it is leaving their processes running. When this happens, the sar %idle drops from 98-95% down to 25-20%...

Has anyone used SCO 6V? Is there really any advantage to using 6V versus 6.0 when running VMware? I have looked around but just don't see anything that would make me want to purchase a license for that when 6.0 runs good in VMware. Your thoughts are appreciated. Carl.

Came in this morning to no one being able to login. Getting this error message "Error in terminal setup." This is SCO 6 so went into maintenance mode and ran a fsck -ofull and it appeared to fix a couple things, but on reboot got the same error. Any help is appreciated. Thanks!

I have added a new user for ftp use and limiting that login to its own directory. The problem I have now is, how do I keep that same login from being used for telnet/ssh? Thanks for the help.

Hello all, I am trying to add an Intel Pro/1000 MT to a Dell PE 1600 running 5.0.7 and keep getting an error while trying to add. I also have latest eeG driver 5.0.7h loaded. Error reads as below... Fatal error: can't read "nets(0)": no such variable Error Information logged to...

I have written some files to tape on SCO 5.0.7 using the following command: find corp1 corp2 corp3 -depth -print |cpio -oBvc >/dev/rct0 However when I try to read the tape on SCO 6.0 using: /osr5/usr/bin/cpio -it </dev/rmt/c1bot2l0 I am get an I/O error on read. Which is the same error that...

I need some help getting an understanding what an error message is telling me. I am running a SCO 6 using a /osr5/usr/bin/cpio command on a Dell PE 2900 with a Adaptec SCSI with a DAT 72. When trying to run a backup I am getting.... WARNING: Tape Drive: HA 1 TC2 LU 0 - CHECK CONDITION...

I am printing an EPS file from a SCO Unix server that has color logos and black writing the rest of the way. The black in the logos comes out great. But, the black within the text is coming out a brown or maroon color. Is there some setting that needs to changed in order for the printer not...

Really dumb question time. Do serially attached SCSI drives work in SCO 5.0.7.? Is there is difference other than Serial vs. Parallel? Thanks for the help. Carl.

moto, as always, you rock. Moving the resolv.conf file out of the way helped. They are able to ftp without any issue now. Thanks and have a star! Carl.

Moto, the system is at 99% and 100% idle consistently and telnet has no issue at all. The remote location is running all fine and dandy through telnet as well. ifconfig: net1: flags=4043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.100.54 netmask ffffff00 broadcast...

I will do that. However, those were not installed when ftp was working without issue on the original hard drive.

Reloaded in the sense that the hard drive went kaput and this is a new hard drive reloaded with OS and data. Patches as in? It has 5.0.6 Enterprise, rs506a and the ALN-325 NIC driver. I have not seen any patch on SCO related to this problem other than some for 5.0.5.

A customer has a recently reloaded system running 5.0.6 that is having a ftp issue. Using Cute FTP, command line ftp and Absolute FTP all are disconnecting while trying to connect. From the local host I ftp and get a connected message but it takes 1 to 2 minutes to get a login prompt. I have...