Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by caljud

  1. caljud

    Option 11 NIT Destination

    Hi guys, Just a quick note to all who gave input. I found the fix this morning. The system here is so old it wouldn't let me use oveerlays 14 and 16 so I couldn't do anything with rdb's etc. So what I did was, as suggested above, put 0 in my VSDN table with same routing as 7004. I then put 0 as...
  2. caljud

    Optipoint 500 telephones

    Thanks guys. Have forwarded to the relevant bodies to bury this one and for all.
  3. caljud

    Option 11 NIT Destination

    Hi guys, Re : the ongoing saga - thanks to all for your current input. However, having a weekend away from the issues has given me an idea which, from this morning's delving, has, I think, given me a clue as to whats going on and for which I would appreciate some thoughts. Currently, when I...
  4. caljud

    Optipoint 500 telephones

    Hi Folks, Can anyone tell me whether the above handsets will work in place of a GPT DM24 Multiline handset on a GPT Realitis? A customer of mine has gone and bought some even though advised that they probably won't work. Good sales job there!! Cheers
  5. caljud

    Option 11 NIT Destination

    Hi KCFLHRC 7004 is a dummy ACD queue with ACDN set as 7004, MAXP set to 1 and NCFW set to 7000 (mail access). When I dial 7004 internally the mail system answers and performs all the functionality I have set up with regard to selection routing etc. I have set 7004 to be the NIT 1 setting using...
  6. caljud

    Option 11 NIT Destination

    7004 is a dummy acd que
  7. caljud

    Option 11 NIT Destination

    hi kcflhrc, when I prt nit data in ld21 it shows NIT 1 as 7004 with no timers and nits 2 to 4 with no entries. hi firebird, my ld 49 only shows one table ta
  8. caljud

    Option 11 NIT Destination

    Hi folks, Back in July you guys very helpfully gave me the info to activate a DN enabling caller access to a VSDN menu which Ive set up and can access by dialling 7004. However, I've tried to make 7004 as my NIT 1 destination using LD 15 and, with the switchboard in Night Service, called in on...
  9. caljud

    Creating DN (Phantom?) on Option 11

    Thanks buddy. Will try out on my next visit to that site.
  10. caljud

    Creating DN (Phantom?) on Option 11

    Hi Guys, Got a question re the above. I'm attempting to program a night service auto-attendant on my Option 11 and have run up on a prob that I'm not sure how to do. I have programmed a new entry (7004) in my Voice Services DN Table on Meridian Mail which has a service of MS103. This has a...
  11. caljud

    QSIG networking

    General question for uk-based guys. Has anyone ever tried or setup qsig between an ip500 and a realitis dx? thanks in advance.
  12. caljud

    NightService on meridian 1 option 11

    Hi Firebird, Thanks for your input. I'm sorry to have to ask this as I'm really not aufait with Meridian programming. Would you have time or inclination to list out required programming steps and also the operational procedure to activate the facility. Reason for asking is that our onsite guy...
  13. caljud

    DM24 handsets

    Hi Guys Bit of a longshot here! Does anyone know of a UK source for DM24 digital multiline handsets - obviously refurbed - or spares for the aforementioned. Cheers for any advice.
  14. caljud

    NightService on meridian 1 option 11

    Hi Guys, Need some advice regarding night service options. Am a telephone systems engineer but do not have breadth of knowledge on meridian. We have a requirement where on a totally "on demand" basis we need to route our main DDI number to an offsite location. However at all other times the...
  15. caljud

    KX-TDA30

    I have a KX-TDA30 with software level 2.2 . I would like to know the procedure to upgrade the software to version 5 for which I already have the downloaded file. Do I need to load this onto a new 32Mb SD card or is there a method of doing a direct download/upload using Maintenance Console? If...
See more

Part and Inventory Search

Back
Top