Recent content by cabracy

Another option is a traffic shaper. Check out www.trafficshaper.com. Chris.

It looks like the second string is the ASCII of the first (35H is the digit 5, etc). An excel macro should be able to do the conversion. Chris.

I am trying to create a banner / seperator page using PCL. The software will send the following code in the beginning of the job: @PJL SET JOBATTR="JobAcct1=BRACYC" @PJL SET JOBATTR="JobAcct2=GVC11343494" @PJL SET JOBATTR="JobAcct3=USWAPACCTS" @PJL SET JOBATTR="JobAcct4=20041104072722" @PJL...

It works on a 5300 controller so it should also work on the built in controller. Add the drives, boot with smart start and go to array maintenance and add the drives to the array. You can also replace the drives with larger ones. Just pull a drive, replace it with a larger one, waiting for...

Running nw6nss3b on 4 clustered servers with more than 1000 users and no problems. It stopped a corruption issue we were having. It is running for a few weeks with no issues. Chris.

Its been a few weeks, so I may off slightly, but here goes... 1,2,3 I don't remember getting any switch questions sims, just router sims. 4 I think it always listed the number of answers to check. 5 Not sure since my score wasn't 1000, but I think only hte end result matters. If make a typo...

I have been avoiding nw6sp3. There are still a few open issues. nw6sp2 does not need sp1 first, it is cumulative. But if you go that way, there are a few extra patches. ndp3sp2d, tcp605o, and nw6nss2b. I'm not doing Zen here, so if that applies, apply that also. Also Edir 8.6.2 has a...

The NW5.1 to 6 process is real smooth. We just did 4 servers on a single day. The only issue we ran into was that the C drive was not big enough to hold the backups. The prep was to make a backup copy of the data and also of trustee information. I use tbackup (free on the internet) for...

NW6 and NDPS have it built in. Just configure the printer as NDPS and then click on the LPR tab in NWAdmin or Console1. On the unix side, it just a standard remote printer, using the IP address of the NDPS manager and the name of the printer. Chris.

What you describe is the default and intended behavior of the VPN client. This is to ensure that your local machine is not hacked and then allows a tunnel into your corporate network. Microsoft had a big problem with this a while back and a pile of their source got out. The Cisco concentrator...

Uimport does not work in NW6 (or at least not very well) LDAP is the new way to do such things. If you look at Novell's documentation, there are good examples there. Chris.

If your ISP is hosting and it is their IP address, they are responsible for the reverse lookup. This is especially true if your ISP also does your DNS. Even a bad ISP should know how to handle that issue. Chris.

A 603 could indicate that the schema is hosed. Try a dsrepair, advanced options, repair local database, repair operational schema. You may need to do this to both servers. Then try deleting the new certificate and re-create it. Chris.

One way is through the NDS ODBC driver. http://developer.novell.com/ndk/odbc.htm There are several app notes etc with details on Novell's site. Chris.

I can turn on and off the mesage waiting lights. The cust login can make those changes. I need the system 75 to tone the extension that the call is for to the voice mail system. I thought that was what mode code is. Am I wrong? I was told that there is a yes/no question in change customer...