Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by bythespy

  1. bythespy

    Probably asked before by Newbie

    Ahhhhh... Translated that means all of my experience is in the US. But as far as IP goes you still need an IP Gateway for the PBX in question. The Nortels use an ITG Card, that is connected to your WAN router, I assume the others have this capability as well. How many sites are you linking...
  2. bythespy

    CallManager and Unity?

    And it is free, if you are legal! Mspivey CCNP Have you been to www.ciptug.org ? The OFFICIAL Cisco IP Telephony User Group!
  3. bythespy

    CallManager and Unity?

    Documentation, Documentation, and Documetation. Cisco may have its share of faults, but when it comes to application installation and integration it is all in the DOCUMENTATION. It is boring, but it will solve your problem, because you should not even consider doing some of the things you just...
  4. bythespy

    Experienced Call Manager-help!

    Call your local Cisco Rep, they can help you find people with experience that are looking to move. Use your Cisco partners too. That is how I got my job. I told my Cisco rep to tell anyone that he could that I was looking for a job. He got me several interviews and offers, I finally went to...
  5. bythespy

    CCM Voice Recording

    www.Corvero.com This is the coolest application ever. It works like this: You install the appliance it integrates with CCM and is approved by Cisco! You select the phones that can record conversations and go through a few configuration items. Here is where it gets KEWEL, since your...
  6. bythespy

    Probably asked before by Newbie

    What is DPNSS? If you are connecting TDM to TDM do you need to do VOIP? You can interconnect TDM PBXes over point to point T1s or some other meduim without doing VOIP and accomplish your goals. If you are set on doing VOIP you will need and IP gateway for each PBX, and they all do it a little...
  7. bythespy

    Why happens that?

    Yep the PLAR statement will get you in business! Mspivey CCNP Have you been to www.ciptug.org ? The OFFICIAL Cisco IP Telephony User Group! "convergence isn't coming...... it is here." mspivey 2003
  8. bythespy

    Cisco to Nortel Question

    Technically you do not have the option 81 connected to the CCM, you have it connected to a T1 interface in a router or CAT switch. Please give me some details on the topo of your network. I had this problem and I am pretty sure I can get you headed in the right direction. More than likely...
  9. bythespy

    Vlan + DHCP Scopes + 4506

    I assume you will be terminating the fiber to the media converters in close proximity to the switch? I am also hopeful that you do not already have the copper GBICs. The fiber link between the switchs will give you more bandwidth and will be a more reliable solution. If the three switches...
  10. bythespy

    VOIP for call centers

    matt I disagree there is a fundamental difference between VOIP and IPT. The industry is growing so fast and it is very easy to use the terms as synonyms but they are not. VOIP is defined by most people in the industry as the transport of voice in an IP packet, the actuall network may or may not...
  11. bythespy

    Vlan + DHCP Scopes + 4506

    I agree, stay away from media conversion. how many 2950 switches will you have in production? Mspivey CCNP Have you been to www.ciptug.org ? The OFFICIAL Cisco IP Telephony User Group! "convergence isn't coming...... it is here." mspivey 2003
  12. bythespy

    Vlan + DHCP Scopes + 4506

    You will have a fiber gbic blade in the 4506 correct? You will have a fiber gbic in each 2950 correct? You will set these ports up as trunk ports on each end and it will be just like a normal ethernet port. Don't get hung up on fiber vs copper, to the switch it is just faster ethernet...
  13. bythespy

    Vlan + DHCP Scopes + 4506

    Your layer 3 approach per floor is a solid idea and should work fine. Unless your users are move multigigabit files you should not have any problems. On the vlan issue: I am not familiar with the 4000 series but I am assuming it has a layer two capability much like the MSFCs in my 6509s. You...
  14. bythespy

    Starting to look into Telephony IP Solutions

    Interesting. I will be intersted to see the 999 to 199 phone products and the less than 199 systems in the coming months. CCM and Unity Express are really KeWel! Mspivey CCNP Have you been to www.ciptug.org ? The OFFICIAL Cisco IP Telephony User Group! "convergence isn't coming...
  15. bythespy

    cisco softphone

    The Cisco Communicator (new IP softphone name) is out.... or it was. It was supposed to go public on the 15th, but they pulled it back. I do not have a new release date at this posting. However.... if you are on CCM 3.3.3 SR3 and you can get a copy for testing purposes. When you add a new...
See more

Part and Inventory Search

Back
Top