Recent content by BusinessPhoneSystems

I am sure you have probably done this as a first option, but a restart of the system has resolved a couple of issues for us on Embeded VM. Fortunatly this is few and far between but worth a go. http://www.alfred-ashley.co.uk http://www.alfred-ashley.co.uk Business Phone Systems from Alfred...

We always recommend checking the bin files in the Admin CD/download as they normally always include a .99 version if required and from the file name you can ascertain if this is relevant to your system. Hope this helps http://www.alfred-ashley.co.uk http://www.alfred-ashley.co.uk Business...

We have exactly the same with IP Dect on 4.2.x. We have good local latancey etc but we are running over sip trunks and believe we have some lazy lines on the trunk side but we are still not convinced as it only seems to effect the IP Dect. We have done a lot of work with SIP Trunks...

Slightly off subject, but has anyone in 4.2 tackled the One-X symbian or MS Mobile client yet? I have just wasted approx 2 days of my life trying to get around the short code structure in combination with the config file on the phone. The PDF is a little misleading to me anyway and I am sure...

Hi, We have done quite a few Gamma SIP Trunks both SIP Registration and IP. There is a Gamma document that gives you the basics but to be honest we use our own examples now. However, I have just found a copy of the document and I am happy to email it to you if you require. My email is...

Yes, you are correct, with a DSL line and a SIP account all should be well. Ideally a SIP trunk account that will allow for multiple DDIs etc, presenting in a simular way to ISDN. http://www.alfred-ashley.co.uk Business Phone Systems from Alfred Ashley - Voip and Avaya Digital Telephones for...

We have found the following vital in configuring SIP: 1) Running Stun - even if it doesnt do much but define the firewall or router. 2) Set the registration expiry to below the NAT timeout - we use 60, which creates traffic but resolved some issues. 3) Request a static nat feed for sip trunks...

I may be missing your point, but if you take a DDI and set the destination to Voicemail, this should allow remote users to dial in and access their mail boxes. We have found embeded voicemail to be a little odd in places although to be honest I think it is the fact that there are subtle...

The first thing is to review your options using the console serial port at the rear of the telephone system. There are a number of commands available but I must confess normally we normally erase the current config as a recovery. Secondly I dont know if there are any old Manager directories...

Can anyone tell me if there is any way to get Sage Saleslogix to work with the AVAYA IP Office to pop screens etc. I have seached and seached and cannot find any sensible answers. Any comments would be appreciated!

Thanks for that. I will give it a go! Regards Impreza

Thank you for that, I will give it a while. Regards Impreza

Are you sure that RedHotAnt supports 128K. I was on the site the other day and could not see 128K available! Might be totally wrong but, thought I would give it a mention. Please let me know what you think of the ISP as it looks interesting!

Sounds like a strange one! Might be worth starting to swap hardware components to see if something might be broke! Are these routers live or can you get them into the lab? If you can then it may be worth getting a female cable and connecting the serial ports back to back and check that it is...

In an ISP senario I would imagine that you want to set the idle timeout to rip down the connection on inactivity. I am not sure but, I think that you are probably confusion terminal connections and IP connections. (Or I may be!) I must admit that I normally use the cle int bri?/? command if I...