Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

budbyrd's latest activity

  • budbyrd
    budbyrd replied to the thread Separate Router needed for an SCN?.
    That is a pretty wide open question. For small SCNs we used many types of connections. Most small SCNs we used an external site to...
  • budbyrd
    budbyrd replied to the thread SCN moving users to a new site.
    You can leave them on the first site if you set them up as hot desk users. The only problem I have had doing that was network...
  • budbyrd
    budbyrd replied to the thread Twinning in Avaya IP Office.
    What kind of CO lines do you have? You need PRI or SIP. Analog do not work.
  • budbyrd
    budbyrd replied to the thread mask number for internal calls.
    I can honestly say I have no clue what you are looking to do. On it's face value there isn't a way to make internal calls anonymous to...
  • budbyrd
    budbyrd replied to the thread IP Office.
    First thing you should find out is if your provider supports CID outbound manipulation. Some do natively and some charge for it as a...
  • budbyrd
    budbyrd replied to the thread SAVE.
    Did you hit the save button? Did you send the config back to the system after it was saved? Have you done anything to attempt to...
  • budbyrd
    budbyrd replied to the thread Analog Unsupervised Disconnect issue.
    I do believe that the copper it's self has been there since the 70's. But the CO equipment has probably been recently upgraded since...
  • budbyrd
    budbyrd replied to the thread Analog Unsupervised Disconnect issue.
    Keep hassling Century Link. They can do it... Just the kids they have for tech support don't know how to do it. There are a lot of...
  • budbyrd
    budbyrd replied to the thread Button Programming to dial number shows anonymous.
    If I am understanding the question correctly it sounds more like an issue with the service provider. CID is a function of the provider...
  • budbyrd
    budbyrd replied to the thread Avaya IPO Yealink BLF feature keys..
    You probably want to post this to the regular IP Office forum but most third party endpoints don't have most of the functions of the...
  • budbyrd
    budbyrd replied to the thread SV8100 Beeping.
    I know on the 9500 beeping like that is a packet loss warning. You probably have a network issue. I also know there is a setting that...
  • budbyrd
    budbyrd replied to the thread analogue trunk problem ip office.
    I would be curious about the hunting of the lines and the number of rings before it switches. The IPO will wait for the CID between the...
  • budbyrd
    budbyrd replied to the thread AVAYA ACS PROC. R4.0 cant reset VM.
    You are going to want to post this in the Legacy Avaya Forum...
  • budbyrd
    budbyrd replied to the thread IPO500 call forward no answer in hunt group from a analog trunk line.
    I can honestly say I have never tried to use two extensions with sequential hunt for off site transfer but I would use Monitor to see...
Show older items

Part and Inventory Search

Back
Top