Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by buckethead34

  1. buckethead34

    Cannot get Cisco rate-limit to work

    Maybe try doing the rate limit command on an interface that is in the 112 vlan and see if it has any affect, then you would just apply it to an interface range (all i/f in VLAN 112).
  2. buckethead34

    Cisco WLC 4402 IAS Active Directory interfacing

    In Active Directory Users and Computers, you need to go to the User Properties and the Dial-In tab and allow remote access. By default it is denied.
  3. buckethead34

    setting up network printer

    I'm not very good with Solaris, so here's the info for the OS. It's SunOS Release 5.9 Generic_118558-21 Desktop: CDE 1.5.7, X11 Version 6.6.1. I want to set up a network printer. Our print server is a Windows 2003. I tried to add the print server IP into the Print Manager, but I don't seem to...
  4. buckethead34

    file and printersharing

    Do you have a domain controller that you can set up a group policy for?
  5. buckethead34

    Building XP on VMware

    Appears that all of my settings are correct, LSI and I've pointed my floppy drive to the floppy image on our VMware. It lets me select to load the VMware SCSI Controller driver but then still doesn't detect the disk after it. As for you Roadki11, you suggested IDE, I said nothing of it. Why...
  6. buckethead34

    Building XP on VMware

    Maybe I am confused, this wizard doesn't look like mine. I use VMware Virtual Infrastructure Client 2.0, the other thing is is that i'm fairly new to VMware, we have ESX servers. Does this help any?
  7. buckethead34

    Building XP on VMware

    All I see is SCSI in the drop down menu, on the Advanced Options dialog box. I've looked everywhere, there's no option for IDE.
  8. buckethead34

    Building XP on VMware

    I just went through and recreated the virtual machine and when I get to the I/O adapters it gives me IDE -> ATAPI or SCSI -> BusLogic/LSI Logic but only radio buttons are on the SCSI options.
  9. buckethead34

    Building XP on VMware

    I'm saying it is not an option, only scsi drives are installed.
  10. buckethead34

    Building XP on VMware

    IDE is not a choice in my setup.
  11. buckethead34

    Building XP on VMware

    To further explain, I choose the VMWare SCSI controller driver and then it goes back to the screen where you can press S to specify additional SCSI adapters, or press enter if you don't have support disks. I hit enter and it throws up the screen that it doesn't detect the disk. Thanks for your...
  12. buckethead34

    Building XP on VMware

    I did what you said and it detects the SCSI driver, but then it does the same thing after i choose the VMware SCSI. Same thing meaning that it doesn't detect the disk.
  13. buckethead34

    Building XP on VMware

    Can you point me in the direction on how to install these?
  14. buckethead34

    Building XP on VMware

    I'm trying to build an XP machine on VMware, but when I try to install it, it says that there is no disk. I've tried hitting F6 for SCSI, but still no go. Any ideas?
See more

Part and Inventory Search

Back
Top