Recent content by brea

Once I setup a nat 0 command with an access-list to ignore the traffic on the source DMZ it worked fine with the command you mentioned.

Here's the actual config I have in place. nameif ethernet2 dmz1 security6 nameif ethernet3 dmz2 security8 global (dmz1) 1 interface nat (dmz1) 1 192.168.161.0 255.255.255.0 0 200 nat (dmz2) 1 192.168.162.0 255.255.255.0 0 200 static (dmz2,dmz1) 192.168.162.24 192.168.162.24 netmask...

That doesn't work.

541 was a typo on my part and I am working on trying to get the static to work. It seems like it's not.

I'm having a problem getting syslog traffic to pass between to DMZ interfaces on a PIX. Here are the details. DMZ1 security 6 inbound ACL (traffic1) applied Nat (global) 1 interface applied nat (dmz1) 1 10.10.10.1 255.255.255.0 0 200 applied DMZ2 security 8 inbound ACL (traffic2) applied nat...

So I'm a bit new to ISA. Thanks for the help... I have inherited an existing installation and there is a small problem. There is a specific group of users that we want to permit http to a small set of sites and then deny all other sites. There are currently three rules that are in use here...

going under the assumption that I cannot get the remote site to change the way their site allows this connectivity.. Is there somethign I can do to get ISA to make the connection properly?

I am going to do some testing on the site myself, outside of the ISA environment first. Thanks.

The remote vendor said that they get this error all the time and that the fix is a change to our 'firewall' or ISA server in this case.

We're hainvg a problem with our 2004 ISA Server. WE're connecting to a site to download a specific document. The link for the download redirects us to the same site but on port 8085. I setup a rule to allow port 8085 through from all but am still getting this error. Error Code 10061...

I can't do that unfortunately. The Forrest where I would need to add this is a single Domain Controller and the group that set it up has it setup as a root server. I am doing some research on how to reverse that, if possible, but I have to be extremely careful as to not break anything since...

Let me add a little to this in case it makes a difference. one of the domains is not a domain that we manage but have access to for setting up the trust. it is actually. our domain = x.com remote = y.local I followed the steps to setup the trust and on x.com it tells me that the domain could...

Hello, I need to setup a one-way trust between x.com and y.com. Currently while attempting to setup the trust I am getting DNS errors related to the domains not being able to contact eachother. I have found some articles related to DNS needing to have the srv records for the y.com domain and...

We are running version 10d and are getting the following errors. AOFO: Initialization failure on: "\\***\Microsoft Information Store\First Storage Group". Advanced Open File Option used: Symantec Volume Snapshot Provider (VSP). Snapshot provider error (0xE0008516): Resources specified for...

I have a question that I can't find the answer to yet (still searching). We have a 2950 and one of the guys troubleshooting tells us that the problems occuring on the switch (defined as wierd connectivity problems) were caused because Vlan 1 was disabled. Now I can't remember exactly but I am...