Recent content by bosseye

Sorted it. For some irritating reason, for proper SIP registration Cisco require the username to be the same as the number...! That being said, as I have CME7.1, I fixed the overlay problem using Single Number Reach. So for the incoming dial-peer, I simply added the following: mobility...

Sounds like a problem I had ages ago which was fixed by: voice service voip no supplementary-service sip moved-temporarily

Thanks - that makes sense. Unfortunately I can't test it though, as I uncovered a different problem registering SIP endpoints - once I set them to "register & receive incoming calls" I get a 404 error, which does happen if this is not set (whereupon I can successfully make outbound calls)...

Hi All - perhaps you can help? We have an existing CME SCCP on 2811 running 7960's/7970's. We use incoming SIP trunks to ephone-dn's and overlay these to multiple phones (so multiple users can see the incoming line ring). All fine. Now adding a couple of SIP clients, most notably iPhones...

I have tried and tested and now have a remote SCCP phone! Many thanks for your contributions. I also noticed that if you simply change the TFTP server on a SIP 7960 to the CME then restart the phone it has the same effect - flashing the phone into SCCP and configuring it. br

Thanks - and yes - there are DNS servers at both sites. Does anyone know more about this option?

All, Our 2811 is running CME (SCCP) successfully with many 7960s/7970s, and we now have a remote office online via a router-router VPN. CME is 10.0.0.1 and remote office is 10.0.1.x. How do I get remote 7960's at 10.0.1.x to come up on CME at 10.0.0.1. As the MAC address is used by CME, I seem...

All, Currently have a mixed SCCP/SIP CME implementation. Looking to have incoming Skype calls as a ephone-dn (so I can map it to a number of handsets), and outbound Skype calls (via a dialling prefix). Aim is to provide a free-Skype dial-in number of international callers. Has anyone...

Am at the final hurdle with CME4-Asterisk and have hit a snag re: call-forwarding on no-answer: - for an e-phone-dn that relates to a true POTS line (ie. FXO) - all works fine. - for an e-phone-dn that relates to a SIP account, after the timeout period (ie. call-forward noan 123 timeout 20)...

Sorted this one myself - don't do it at the dial-peer, do it under the ephone-dn. Obvious really...

Everyone, We're currently working up an Asterisk vmail config - but have hit a (seemingly trivial snag). Perhaps you can help? We use Shared Lines extensively, such that a single user can see multiple POTS and SIP incoming lines. For this reason, configuring a single Voicemail pilot number at...

That was a helpful link - thanks. Actually it was so helpful it sort of diverted me from SIP trunks to a pre-requisite something else I've been hankering after for a while - mixed SCCP and SIP client support. Simple - just take one working SCCP CME and add the following lines: voice register...

Hi, My 2811 image is the c2800nm-adventerprisek9-mz.124-11.T.bin which is pretty full featured and current. Any chance you could post me a link to a sample config, hopefully with specific regard to Asterix with vmail (as I seem unsuccessful in finding these?). Appreciate your help. br/

Hi Everyone, Have CCME4 on a 2811 working just fine using SCCP, but need voicemail. Have Asterisk, which my colleague can configure, but cannot find any published configs for the Cisco end of things (have seen lots for asterisk though). Does anyone have such a config they could post - I think...

Hi everyone, I'm trying to get together a baseline config to VPN multiple 2811's into a central 2811. Tried SDM, but it seemed to insert way too much unnecessary stuff. Does anyone have the core lines for the remote sites and the cores for say just pre-shared key, with user authentication on...