Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by bevcomm

  1. bevcomm

    Basic Aspire S Programming

    One of my customers acquired another business and they have an Aspire S. We need to bump from 16->24 stations and do some minor programming ... Add 1 extension and change a couple voicemail boxes. There is an Ethernet card in the unit... Which, in previous experience, allows a remote tech...
  2. bevcomm

    MICS / CP100 Question

    basically if its in day / normal ringing , I need the AA to answer after 8 rings, as a backup if its in night mode I need it to answer after 4 rings - so individual extensions don't forward to VM after 4 rings if that makes it more clear
  3. bevcomm

    MICS / CP100 Question

    Hi, I have a customer with a unique situation During the day, calls are routed through the receptionist (221) if she is busy on a call, or steps away from her desk, then 2 other people in the front desk area can press the group pickup button and answer the call. This poses a problem when...
  4. bevcomm

    Messaging

    Hey All, When I try to do a 777, 0#, (password) and then 9, it says invalid selection. Am I missing a step? I am trying to re-assign the mailbox from 14 to 30
  5. bevcomm

    12x0 Fiber Trunk Module

    I swapped the cards, removed all but 1...etc. The power LED was on. I have a replacement in stock, I'll go try that one tonight.
  6. bevcomm

    12x0 Fiber Trunk Module

    I think its a dead module. Accessing the lines says "not in service" I swapped out the fiber, that didn't work either. I'll send it back and see if the new one is any better.
  7. bevcomm

    CP100 answering every call

    That was the problem. Thank you
  8. bevcomm

    paging volume on handsets

    Thanks for the input. I told the people here that if it is too loud, to turn down the volume while the page is being broadcast. They want us to do it... $$$ yah! The amplifier volume is perfect, so they say thanks again!
  9. bevcomm

    paging volume on handsets

    Any idea how to adjust the volume? They do a page sets, and it blasts throughout the place, and everyone gets startled... old people. I'm going to have to donate to tek-tips, you guys have been a great help!
  10. bevcomm

    CP100 answering every call

    Question, Should the VM ports be APPR&RING?
  11. bevcomm

    CP100 answering every call

    update: we turned off the general delivery mailbox and it goes right into voicemail and says "the person you called is not available, using the dialpad please enter....." I have been through programming to try to figure out which station is sending to VM, but only 1 phone is set to Appr/ring...
  12. bevcomm

    CP100 answering every call

    This was working OK yesterday, all of the sudden today, all of the lines get answered after the 1st ring with the general delivery mailbox. The customer went and unplugged the CP100 by himself, and he's just about ready to shoot it with his 12 guage. Any advice?
  13. bevcomm

    12x0 Fiber Trunk Module

    I rebooted last night, didn't help. I left it up and running since about 3am this morning, so hopefully when I get in it works.
  14. bevcomm

    12x0 Fiber Trunk Module

    Hi, Is there a trick to getting one of these 12x0 modules to work? I have it plugged into the top port (8) of the 6 port fiber expansion card, and programmed that for a trunk module.... but in programming the module says "unequipped" and when I try to access a line, it doesn't work.. it says...
  15. bevcomm

    Callpilot 100 HEADACHE

    That did it. Thanks everyone for your responses!
See more

Part and Inventory Search

Back
Top