Recent content by BenyG

The issue: External emails sent to public folders bounce with the following error: Your message did not reach some or all of the intended recipients. Subject: fgfgfgfg Sent: 16/04/2009 09:50 The following recipient(s) could not be reached: test@company.com on...

I did not run Security Config Wizard before configuring POP3. This is not a new installtion and was previously working fine. Windows fw is not enabled. Benjamin

Dear all, I have an issue with Exchange 2003 SP2 where POP3 is not working. Essentially users cannot connect to it - when telnetting to it the banner is not displayed but it does look like it is waiting for a responce from the client; however as soon as I start to type anything the server...

Thanks for your post. Eventually I just pulled out the predictove-failure HD which then forced it to use to start building onto the hot spare. Benjamin

I have a HP Proliant DL 380 with among others a RAID 5 array with three disks and a hot spare. Two of the disks are showing as 'predicrive failure' which is of course not a good scenario. How do I force it to start using the hot spare? I understand that it will normally only start using it...

I have already posted tosome Mediawiki sites,no responce as yet. This isnt a Squid issue as Squid works fine, Benjamin

Dear all, I have Apache 2.0.55 (Ubuntu), PHP 5.1.2, Mediawiki 1.9.3 and Squid 2.5.12. Squid is acting as a reverse proxy and is listening on port 80 and Apache is listening on port 85 so that I can still bypass squid for testing on another machine on the LAN. Meidawiki is not using Squid, or...

Dear all, I know that this is not stictly-speaking an issue with Squid, but this is the nearest I could find on the site. I have Apache 2.0.55 (Ubuntu), PHP 5.1.2, Mediawiki 1.9.3 and Squid 2.5.12. Squid is acting as a reverse proxy and is listening on port 80 and Apache is listening on port...

The site always works fine when the IP address is given - it is just that the responce from my ISP DNS when queried as a forwarder is 30+ seconds but when I do it myself through nslookup it comes back straight away. That said, on investigating it further there are some issues at the site's end...

It is a preference usually - 2003 should use DNS all the time in a 2000+ environment but friends of mine state that there are still lookups when there should not be. Using WINS can also be more reliable than DNS dynamic update as you do not have to worry about tweaking scavenging settings etc...

I have a similar issue - the nameservers for a particular domain are down and as I do not normally use forwarders and there is no cached lookup the resolve is not working. My ISPs DNS resolves it fine so I thought turning on forwarders would fix it - but it hasnt. The ISP DNS comes back with...

The issue occurs when printing from Windows, any other ideas? Thanks, Benjamin

Dear all, I have an issue with an HP 4050 printer where if it runs out of paper the jobs gets cancelled rather than pause and wait for new paper to be put into a tray. The issue occurs when printed to via a server or directly and when the paper runs out in either tray. I have tried searching...

The thread mentioned turned out to be a great help, this turned out to be an issue when the display on the laptop was on the LCD and CRT. As DirectX playback writes straight to the hardware it can only be replicated onto 1 display. Pre WMP 9 ish movies simply did not play in this scenario but an...

Dear all, I have a very strange issue: A user cannot play movies in a Window - it always goes to full screen. Whilst playback is in operation the screenmode/resolution changes to fit the size of the movie by the looks of it and it is impossible to quit out of it. Press Ctrl+Alt+Del brings up...