Your understanding is correct. The feature cartridge (software), contains the feature set for the particular version of software. The manipulated Customer Database (including keycodes) resides on the KSU of the CICS, or on the NVRAM cartridge in the case of the MICS.
That being said, there is...
Try recording all of your instructions to the caller in the CCR home menu prompt. The greeting that plays before the CCR could be a simple "Good morning" or "Thank you for calling ABC Company".
BCMguy.com
www.BCMguy.com
Hi Guys,
The BCM50 is really priced right! I quoted a BCM200 last week for a customer that has decided they can put the purchase off until June. The 200 came in at just over $9,000 installed. I ran a quote on the 50 today and it was only $5,400. This should really get the BCM moving in the...
senk1s is correct. However, I'm pretty sure the VMI has been discontinued. Somebody please set me straight if I'm wrong.
Thanks!
BCMguy.com
www.BCMguy.com
Bad news for you. No station side analog device is available for Norstar, that will provide (generate) disconnect signal to far end. The same is true for the trunk side (any analog trunk card, LS/DS or CI). They can be optioned to recognize an incoming disconnect signal, but will not generate...
Those 2xxx DNs shouldn't mess up your call routing, unless you are dialing the conflicting digits from an intercom key. It would be typical to access a line in some way before trying to pass those digits. Usually this is done by dialing "9" to access a line pool or match a destination code...
joverly, I'd say you just moved to TIER III :-)
jimhusted, Are you an instructor at GK in Richardson? I think you taught me BCM 2.0 a few years ago.
BCMguy.com
www.BCMguy.com
The i2050 client software is certainly priced right (free), you just download it from the BCM. You will have to purchase a 'seat license' for any client that you might use. As for h.323, you could give NetMeeting a try.
BCMguy.com
www.BCMguy.com
I have had a case open with Nortel regarding the same issue. The Nortel engineers confirm that there is a known issue created by SP2. Their recommendation at this time is to NOT install SP2 if LAN CTE is required.
BCMguy.com
www.BCMguy.com
Have others been seeing this issue as well (or other issues)? I have been putting off applying this patch because of the potential for problems. I hate to be the first one to uncover these issues.
Thanks!
BCMguy.com
www.BCMguy.com
A good vendor can be worth their weight in gold. Having your system configured by a proffesional will go a long way toward making sure you are satisfied with the system, rather than confused and frustrated.
BCMguy.com
www.BCMguy.com
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.