Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by bbylsma
-
Need tips on configuring a point to point T1 on a 2611 router
I made a T1 crossover and have the routers connected and I can ping from Router B to all interfaces on Router A. I can't however ping anything on the web, dns does resolve the address. I changed my IP scheme and now use: Router A S0/1 = 192.168.10.5, E0/0 = 68.76.x.x Router B S0/0 = 192.168.10.6... -
RIP to EIGRP
I'm currently using RIP routing but have all Cisco hardware and have heard EIGRP and OSPF are better routing protocols. Do EIGRP and OSPF use the same entry format as RIP for routes? How easy is it to change? Any things I should worry about or just do it? -
Need tips on configuring a point to point T1 on a 2611 router
Ok, thanks a lot!! To enable EIGRP is that the command i would use and then add the same networks? Any tips on the NAT also? I do NAT on the Firebox but have never on the router...... -
Need tips on configuring a point to point T1 on a 2611 router
I have 2 Cisco 2611 routers that I am trying to connect over a full point to point T1. I would like everything behind Router B to travel to Router A and out to the internet and also be able to talk with everything behind Router A. Router A's ethernet connects to a Firebox with an IP of...
