Recent content by batera

Hi there. Which Distinct CO Ring Frecuency do you recommend?.

just for your information: I was moving the E1 board siwtch, but the switch that has to be set in OFF is from the MBU. Now I recive the trace perfect. regards, Edgar Robles Monterrey, Mexico

Ok. The trace I will see it in the telnet windows using TCP/IP or I need be connect in RS-232? If I need the RS-232 I will need the pinout of the cable and the communication setting. Thanks

by the way... the system is an ipLDK-60. :D slds

Any one knows how to do a trace from the E1 board?. I just have this: 1- dip switch 2 in off 2- Make a Telnet connection to the ipLDK 3- put the password 4- Use the command mon> t b 6 5 And that´s it but I cannot see anything, I don´t know if I missing something. thanks for your help

hi doktor. Is there any version who can works with ipLDK60? regards, Edgar Robles

I will check when I can do this, maybe the weekend. I´ll let you know the results, because until today still not working. regards, edgar robles

Ok, this are the results. If I dial the CO Line and answer in the statin who set in PGM 144, then transfer the call to the 571 and dial the password, doesn´t work. but if I set the CO Line as DISA in PGM 140 ( but with this I will need a voice message) when the system answer me I dial 571 the...

Thanks Doktor. I am in contact with MorenoT and with my dealer. I will let you know our success. Edgar

Ok, I have all the switches in Off. How can I know if I have new or old cards?

the 4 switches are in Off

I made all that thing and still no workin. this are the result of my licenses "Trans/Prog + 78" KEY: 000D6DE401077548 PCK: ................ "Trans/Prog + 79" PC - PHONE LICENSE E:000/D:000 regards Edgar Robles

I made that test, call in on my analogue line, transfer the call to the conference room 1 (571) the system ask me the password, I dial 12345 and and immediately give me error tone. About the file, do you have a newest version of PCAdmin that you can send me? regards

i sent it too

I sent it