Recent content by Barry101

Yes I did, but no difference I'm afraid

Hi All Unusual problem has occured on one op's console. When an I/C call is received (internal or external) the handset has suddenly changed the way it rings in that instead of relatively short bursts of ringing it now has changed to long bursts, almost continuous. I have checked the settings...

Hi pawshman You're right the info is in ALEX under "Power Dissipation".

Hi All I'm trying to find information on the heat output of a fully loaded LIM/s in various configurations for an air conditioning requirement project. I have looked around ALEX & the Ericsson website but cannot find anything. Anyone know where I might find this or point me in the right...

Hi All What's the maxinmum speed a standard modem will operate at when connected to an A/L card - ELU 29 for eg. Cheers

syar - Just what I needed - Many thanks

Thanks for the reply - how as this activated and how do I see the results? I've searched through Alex, but don't find it very clear, unless I'm looking in the wrong place! Cheers

Hi All Can anyone tell me how to check which MML commands have been entered into the MD - I guess it's some sort of history file. I need to check commands that have been entered over a period of time. Cheers, Barry

Hi All I need to re-install Sam 3.6 on pc (I have - 3.5 to 3.6 upgrade) however I need to find SAM 3.5 (which I haven't got) from somewhere as that's required first. I can't find 3.5 on Info Channel - anyone know where I can download it from? Cheers, Barry

Thanks rorni - I knew I had missed something !

Hi All Having a problem changing station (exchange) ID. Use CASII:STN= etc., and CADAP shows it has changed, however all digi phones still display previous company name. Am I missing something here? Cheers

Has anyone got info on the MD Inventory Tool in Sam? Have tried to configure without much success. Had partial success by importing data from a text file (SYECP / CNBIP etc) but not been able to set-up to dial into switch and enable auto generation of commands to obtain relevant data etc. It...

Hi All - Thanks for the info, it's very helpful.

Hi All A bit vague this one, however, will dbc210 series phones work correctly (or not at all) on a bp250 system? Many thanks

Hi All - Thanks for the info