Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by avayatek1961

  1. avayatek1961

    Call Accounting

    We have a S8720 with 10 S8300/g450 Lsp's. We are looking at call accounting systems and want some feedback,good and bad. Has anyone used Microcall , Veramark or any other product. The directory on microcall looks interesting.Not really worried about call records from the LSP's if the systems go...
  2. avayatek1961

    MW Button does not dial voicemail

    my recollection , that is the only way the voiemail message waiting feature button will work. You must have go off hook for the pilot to be dialed otherwise it will function as a phone to phone msg feature
  3. avayatek1961

    MW Button does not dial voicemail

    dis np,,0 look for D73 error 60 tells you the pilot is already programmed . On the ext that has a lite do a can mw,,****,all ****=ext pressing the flashing mw lite when there is no msg will activate the station to station message waiting feature.MW:SND,CAN,VEW(1-3)#" It will only dial...
  4. avayatek1961

    2420 Message Button Programing???

    when you are programming the phone (site administration), you add the voicemail pilot on page 4. It is on the bottom of the page where the the main call appearences are. It sounds like you are looking at the phone.
  5. avayatek1961

    ring control

    You want the ring to actually sound different.On 2420 phones you can have 8 different ring pattern. I have not found a way to have bridged app to have different ring patterns.
  6. avayatek1961

    Tone Before Coverage

    you can get rid of it by cha sys par cov : caller response interval to 0 or cha tone generation redirect not sure how to tell the default setting. careful with this setting.
  7. avayatek1961

    Paging Disconnect

    Did you find a resolution to this
  8. avayatek1961

    Paging Disconnect

    I think this is the reason we are not seeing these fields Because Port Network Support field on the System Parameters Customer Options screen is to Y, There is no Used Only for Paging? field and ?Voice Paging Timeout? field on Page 3 of trunk group when the type is Wats.
  9. avayatek1961

    Paging Disconnect

    All of my issues with on paging were at LSP's (G700 G250 and G450) which do not have aux cards or paging loudspeaker options. I don't believe Wats is an option at the Lsp's. Also ground start doesn't help because in my case people were putting the page trunk on hold by answering another caller...
  10. avayatek1961

    Paging Disconnect

    I had alot of issues with this. My main trouble was people paging then directly answering a call which would put the paging port on hold with music on all the speakers. If I recall I had to do a speed dial with AAR and TAC# del 3 digits and insert 1 which would be heard over paging (single...
  11. avayatek1961

    Paging Disconnect

    There is a setting in sys par fea page 6 use COR for trunk disconnect.Change to Y
  12. avayatek1961

    hold recall

    that timer sets the time until the call starts to ring back. I want to lengthen the actual ring or amount of rings once that timer expires. I look in tone-generation hold-recall on page 2 but am not sure the settings or if that affects the ringing.
  13. avayatek1961

    hold recall

    trying to increase the amount of rings when a call rings back to a station. right now I get 1 ring and a flashing phone symbol next to the line that put the call on hold. 5.1 and 2420 phones
  14. avayatek1961

    Delayed Ring Button

    to get delayed ring to work you must set this on the station that appears on all the sets. Per button ring control = Y call-appr Auto-A/D? n Must be Y cha sys par fea page 1 auto abbreviated ring = 5 that is a system wide setting.
  15. avayatek1961

    Extension Mask

    change public-unknown-numbering 4 ext-digits 5551
See more

Part and Inventory Search

Back
Top