Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by avayastrongman79

  1. avayastrongman79

    Avaya One-x Attendant 4.0.8 restore to new machine

    Thanks kyle555 for your reply. That I'm not 100% sure, It more than likely could be. I see there's another restore option from another server, I wonder if that runs some script changes for old local machine name to new host? I had just seen that option after doing the standard restore process...
  2. avayastrongman79

    Avaya One-x Attendant 4.0.8 restore to new machine

    Hi all... I have an instance of Avaya One-X Attendant (R4.08), in which we're trying to restore from a backup to a new machine. The old machine is unstable periodically drops. We installed the exact same load of one-x attd on the new machine, put backups in correct directory, and then ran the...
  3. avayastrongman79

    General Fax over SIP inquiry

    We're utilizing g450s w/MP160s for DSP. I appreciate your responses, I'll post some feedback after we complete the testing with some of the suggested settings from the thread.
  4. avayastrongman79

    General Fax over SIP inquiry

    Thanks kyle555, I will change the ip codec set in my test NR to t.38, the carrier did say they supported t.38-g711 fallback. Customer also stated that they have very old fax machines, so t.38 may be the route needed. I follow you on the t.38 to core and then relay out after that. I may try...
  5. avayastrongman79

    General Fax over SIP inquiry

    Hi all, we have a customer on newly installed Aura CM7, with R7 session managers and Avaya SBC-E. Inbound calls, voice quality all working well. Around 1400 endpoints, mixed environment of H.323 stations and analogs. As an Avaya BP, we've never deployed a non-fax server solution across SIP...
  6. avayastrongman79

    MWI not working on CM3 after upgrade to CallExpress VM with SIP integration

    Hi all, wanted to provide a quick summary of our resolution. So in the end, we did have to add QSiG/H.323 tie trunk to the CM3. So CM6 core is now QSIG tie trunked to the CM3. Once we had 4-5 test stations' MWI working (I had to put these individual ext entries in UDP/AAR), then we knew we...
  7. avayastrongman79

    Newer LSP than MAIN CM Version

    We recently upgraded a fairly large CM, and I believe there were some different CM loads on the LSPs in our config. I believe the core was 6.1 and there were some 6.0 and 6.2. Just another note to add to the mix.
  8. avayastrongman79

    MWI not working on CM3 after upgrade to CallExpress VM with SIP integration

    Thanks for all of the feedback everyone. Quick update, we now have correct integration going from CM3 back to CM6 over SIP trunk to CallExpress voicemail. Our last hurdle is just getting the MWI working over the QSIG/h.323 trunk. We've got the CM3 message center hunt group set up as qsig-mwi...
  9. avayastrongman79

    MWI not working on CM3 after upgrade to CallExpress VM with SIP integration

    Customer that has a CM6.0.1 using direct SIP integration to AVST CallExpress 8.1 voicemail platform. All phones on the Core CM work properly, but there is a standalone CM3.1 that is using h.323 tie trunk back to CM6 core, MWI is not working on those stations after the upgrade to SIP...
  10. avayastrongman79

    How can I know which CLAN board to which a specific extension is registered

    IF its registered to procr, thats your processor ethernet interface. You can do a display ip-i procr (ip-i short for ip-interface), that will show you the procr ip address. Let me know if that helps?
  11. avayastrongman79

    Aura Messaging Notify Me/Reach Me feature not passing caller ID

    Hi all, just wanted to quickly reply to your posts. We've opened up a ticket with Avaya's servers groups and also the CM group as well. They're currently researching and troubleshooting, as we've identified the exact same issue with our in-house AAM as well. We did consult the config notes...
  12. avayastrongman79

    Aura Messaging Notify Me/Reach Me feature not passing caller ID

    Good morning... We have a customer with CM6 and Aura Messaging 6, with direct SIP integration, that wants to utilize outcalling for a critical oncall scenario. Customer uses standard PRI for outbound/inbound trunks in CM. Currently in our testing, the outcalling or Reach Me feature...
  13. avayastrongman79

    Newer version of FP out :-)

    Thanks amriddle01, just installed an 8.1 with 80+ 95xx sets and it appears they have a couple with the "Please Wait" freezing symptom. Using your link to pull down 8.1.65 and we will upgrade later in the week to see if the firmware upgrade resolves the issue.
  14. avayastrongman79

    CM6 external calls being cut off when reaching MM

    Hi All, we were able to locate the source of the problem. There was what appeared to be one way RTP across the SIP trunk do to an incorrectly programmed default gateway address in the g450. We corrected that issue and it is now resolved. Thank you for your posts and information, and you were...
  15. avayastrongman79

    CM6 external calls being cut off when reaching MM

    We have customer using 96xx ip sets on new CM6 with SIP integration to Session Manager for MM/voicemail capability. Internal calls working properly, message waiting lights/recording works properly. When dialing from any external number, call covers normally to subscriber's voicemail box, but...
See more

Part and Inventory Search

Back
Top