Recent content by AustinPowers

Hola robctech, No problemo! Is your server plugged to DMZ port on a NAT-enabled firewall? if so, you may want to check into firewall config. to make sure there's also real world IP address assigned. Since your setup is not new, I won't suggest that it was improperly configured. All I'm...

Also, have you restarted the questionable server? Do not just press Reset button to restart, you have to actually power cycle the server. AP

Hola, Not seeing IP address indicates a number of possibilities... bad NIC, loose/broken cable, wrong subnet mask, etc. What have you already looked into? also, can you see/ping other servers/workstation from the questionable NT server? AP

Hola, I'd look into the HOSTS file.... Good luck! AP

Hola, I'd look into the Subnet Mask settings... Hope this helps! AP

Hola, The first thing you might want to look into is the memory situation on the servers. When users (most noticable with MAC users) downloading/uploading large files simultaneously, Nt servers can come to a crawl. Hope this helps! AP

Hola, I've read in some MS article that XP visual effects can casue some problem browsing/opening file over a network. Try disabling these effects ... Hope this helps! AP

Hola, Make sure NIC settings says "Auto" for Speed and Negotiation. for some NIC, forcing "FULL DUPlEX" and "100Mbps" can cause more problem than help. also, be sure to obtain latest XP driver for your NIC. Hope this helps! AP

Hi, Make sure drives on backup server are checked under Local Selections and not under Remote Selections. Good luck! AP

Yep! I've found Remote agents to be backward compatible Incidently, 8.5 agent will not work with 9.0 server. Your problem is elsewhere, imo.... AP

Hi, I have same problem, but running Version 9.0. I've tried pushing the remote agent again, but always failed for whatever reason. I had to manually install RANT32 on the servers after updating to latest build 4454. I also try HOTFIX2, but failed everytime with installation program...

Hi all, This is an interesting problem, I thought. I have 2 users running Photoshop 7.0 on WinNT 4.0/SP6. One computer is P4/2.2Ghz + 512Meg PC2100 RAM and the other is P4/2.4Ghz + 1 Gig PC2100 RAM; both on Abit motherboards and similarly configured. What happens is that everytime they...

Hi Friend, It seems the Zip drive is the culprit.... I recall having similar problem with losing drive partition when Zip drive was installed. First try disconnecting it or uninstall Zip driver and load Windows normally. If partition came back, download latest Zip driver and install it...

Hi Friend, It might be time to also update Calcomp driver. I assume your tablet is sharing the same ps/2 connector as your mouse? AP

Hi Friend, This may or may not help, but definitely won't hurt ... Run Scandisk... AP