Recent content by aussie88

Come to think of it, the thread "PRI on Legend as Key system" seems to be asking the same question that I am asking, read nydavid's last post.

I am waiting to hear back in regards to some things. HERE is what they want. They want calls from the main number to ring in like co lines, and they ALSO want the DIDs, to act, like, well, DIDs. In the legend it gives my the option for line routing, or dial plan routing. So they could all act...

Oh, and the "main" number that they are giving me will be completely different from the DIDs. It will be the number that we have on the copper right now. I am wondering if the system will see that number as a DID, or what.

This is a Legend Release 7

I am not sure if Authorization codes will work with remote access or not, but, I am sure of one thing, merlinman will know.

Okay, basically, I need to know how to set this up! So here we have 1 PRI with 4 b-channels, and 1 d-channel. SBC has the PRI set up so that there is a block of 10 DID numbers, and 1 main number for the whole thing. Here is what we want to happen with this. When a person dials one of the DID...

Nup, it is BRI, for sure. THey said 1 D channel, and 2 B channels. What you just said sounds like BRI to me, but, they said that they could get one of the BRI channels to emulate a DID trunk. I said that was just dandy, but, I dont think the LEgend will know what to do with it.

I know that one can have Direct Inward Dialing with a PRI, or, on a channel configured as DID on a T1. But, Can I have Direct Inward Dialing with a BRI? The manual for the Legend says nothing about it, but, the telco does indeed offer it.

Wha, there is a license? I never purchased a license! From the day I got the software, it just printed out the label when I clicked "Print" when I was on the programming page for that phone. Hmm, oh dear, I wonder if the Avaya people are gonna come knockin on my door one day to haul me off?! And...

There is an even easier way though. If you have winSPM then you can go to the "Program" page for a phone, and, do a "File" "Print" and it will print out a label on printer paper, with nice little dotted lines for you to cut on. I like it

Too bad you dont have a Legend. The printout feature for things like this, is truly wonderful. Im not sure why it wouldnt let you assign ASA on 19. Make double sure, that you really did remove Busy Buster from 19. And if all else fails, the picky guy shall suck it up, and change his extension.

You could always try calling Avaya.

I sure do. Press: FEATURE 0 0. Now, press an SA button, and press * 3 2. If it is a display phone, you will select a new ring via the display, there are 8. If it is not a display phone, you will simply press numbers 1-8 on the numberpad, to listen to the rings. If it is a display phone, press...

THere is not a way that I know of

Are you sure that you have the correct tape for your machine? Intuity and WINspm, have the POTENTIAL to be related. First, you must aquire a 355AF adapter. You will plug the 355AF adapter into the back of the intuity, and use an 8 wire cable (CAT 5) to connect the Intuity, to the Admin port on...