Recent content by atin90

Anyway to upgrade the firmware to R8? What do I need to do it?

Just got hold of the version 8 and still can not install on 64 bit system. Did some exploring and found the problem. It's the installer. What I did is that I installed it on 32 bit Windows then transfered the program to the 64 bit Windows and now it works great. Even wrote my own installer for...

Thanks but the info you pointed me to is for IP Office and not for the Partner.

Is there a 64 bit PCAdmin available (7 or 8)? I can no longer use the original software since we switched to 64 bit Windows.

Here is a simple form created on Word 2003. You will notice that on the Speed Dial lines you can enter description that is left aligned and you can also include on the same line but typing from right the actual phone number for reference and it will be right aligned. Form has 3 columns that when...

No password prompt solution: unplug module from Slot 1 That solved it for me.

I just do not see how this "fax stick" would be of any help since the Partner system does the same. I do not know how differently the "fax stick" operates but my logic tells me that it waits for the fax or modem tone for few seconds and if it does not hear the fax signature then it passes the...

I do not know about any way to turn this off. I was browsing trough some web pages of makers of fax software and some indicate in their literature that even some standalone hardware faxes will behave this way. That is real unfortunate because in a small business environment, such feature as the...

I found the problem! It's a real stupid problem. It seems that Microsoft's own FAX program will disconect if a voice comes on. The work around was to put a 4 second pause at the start of the VMS AA message. I realize the recomended period is about 7 seconds but that is just too long and my 4...

Correction - The No Loop Error was an old message left in the log from last year...so ignore this portion of my previous msg.

After more testing I have discovered that most faxes that are sent using Microsoft's own FAX prog terminate as soon as the AA Voice comes on. I have only tested this on my own system Faxing from internal FAX to another FAX on the same Partner system but going trough an external number. Will this...

I finally managed to do almost what I wanted but..... I have 3 lines comming in. 2 lines are voice and the third line was originally for fax. Since we have expanded our bussiness a little we started to use line 3 to call out. Unfortunatelly, some customers then use caller ID to call back that...

If the phone is white then over time it will discolor to yellow depending on the humidity.

Just found my own solution....had to change the'Intercom Dial Tone' to Machine on my fax line and it all works just fine now. Thanks Atin

TouchToneTummy, I did indicate the fax extension using #601 and then set up Hunt group 8 using #505 but it did not do anything....well almost nothing; I could tell that it detected incoming fax because the auto atendand message was cut short but then it never transfered to the fax. When you say...