Recent content by arcolino

@ipohead thats what I was thinking should be doable and regarding the usb pass through to the vm I had the same thought. I am going to go ahead and get the new server and test it, current setup ip office 400 v2 controller. ipo manager ver 7.0.26, system status ver 5.0.26 and vm pro client ver...

hello all, question I am getting feedback the ipo 400 licenses can only be installed on a 32 bit o/s. if so can it be a virtual machine then plug in the dongle and point it back to the vm? want to get a new server get ipo off very old server, and want to go virtual. Would actually like to...

ok guys thanks for keeping this going, the voicemail pro service stopped, could not start, error 1069,had to point the login to a local account. restart service all good. I used this as a reference http://www.tek-tips.com/viewthread.cfm?qid=1120317

ok here we go the the voicemail pro service will not start?

I tried starting up vm pro client getting error. There are no vm pro server on the local machine. it sees the machine but cant connect.

yes, rebooted many times,re-seated all connections, I can remote to the server, ping server and control unit ip, no issues. license type vmpro (4port), available instances unlimited, number in use 0, status valid, instances unlimited, expiration date never license type compact biz center ...

you need more voicemail channels" (what could have changed to cause that) keep in mind no one can check there voicemail. and non are in use. I have vmpro 4 ports, only 4 can check it at one time. I think I know what it could be, I added a second 16 port expansion module, maybe it needs a vm pro...

system alarms (6) 9/1/15 occurrences 5, error 8khz clock source changed previous source was internal but I still have controller set to use system clock 9/1/15 occurrences 72, error the following system resources are all in use: voicemail channels trunks 4 9/1/15 8:18am, occurrences 4, error...

lol u dont understand! no one can check voicemail. everybody is getting the same message. reboot the system same message. the phones when you press the voice mail button nothing happens and when you try to dial it directly message on phone says number busy.

not sure why I am getting this error, "the following system resources are in in use: voicemail channels" i checked licenses, voice pro 4 ports, available instances - unlimited, number of licenses in use 0, status valid, instances unlimited, license expiration date never. researched and did not...

not using "hook switch" device just the phone, then pressing the speaker button.

thx guys, my first thought was the phone itself, she said "its more than one phone" and they are old phones but one of the phones having the issue is a new phone. its a remote site, will send her steps on checking the software build, and make sure no cell phones near the phone, are you saying...

hello all, I have an ip office 500 v2 system ipo ver9, the phones are 5610 ip phones, they are getting ip addresses, phone programs no issues. scenario incoming caller handset conversation voice quality good on both sides, incoming side and outgoing side. but when incoming caller is placed on...

firewall handling dhcp service for the pc's firewall doing vlan trunking for data and voice all ports set to tagged except the port that phone system is plugged into (using lan1 from phone system)and the port voice software server is plugged into they are on the 133.x subnet lan1 plugged into...

I read that on line, the thing is dhcp is being done by the ip 500 v2, I did not see where on the 500 v2 to add scope option number?