Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by apepayne
-
Cisco 2811 and IMA issues
here is my inventory list.... NAME: "2811 chassis", DESCR: "2811 chassis" PID: CISCO2811 , VID: V01 , NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1", DESCR: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1" PID: VWIC2-2MFT-T1/E1 , VID: V01 , NAME... -
Cisco 2811 and IMA issues
Here is my issue. I have a cisco 2811 with the IMA bundle installed. I also have 2 dual t1 controllers as well. These all come up under my show inventory. The issue is that these interfaces are not listed under show int, nor can I list any show controller t1 or show ima interface. My IOS is... -
Routing through T-1 Interfaces w/ 1841
never mind.... dumba** changed the Allied's IP a while ago, and forgot to update the default gateway of the central office's routers... oops...... -
Routing through T-1 Interfaces w/ 1841
Yes, the 172.16.x routers have a default gateway of the other end of the PTP line, and they can ping all the way to the LAN interface of the allied (which means the Allied has a return route statement going back, otherwise, there would be no traffic between the 2).... here is the config for the... -
Routing through T-1 Interfaces w/ 1841
Just to be clear, these routers are not the gateway for the network. There is currently an Allied 415s that is doing the nat just fine. Anyone on the 192.168.1 sub can get out fine, its everyone on the 172.x subs. They can only ping to the LAN port of the Allied. -
Routing through T-1 Interfaces w/ 1841
K, I am still stumped on getting out to the web.... Here is my config for the 1841. Once again, all my subs are talking now, except the 172.16.x subs can not go out to the web... CFHS2#sho run Building configuration... Current configuration : 2625 bytes ! version 12.4 service timestamps... -
Cisco 1811 Question
thanks, that works for the 192.168 sub. I also have 4 other subs that are 172.16.4, .8, .12 and .16 subs that I need to include for internet access. Right now they can ping up the router.... BTW, I took that virtual template off since its not needed.... -
Cisco 1811 Question
So I am fairly new to Cisco routers (deal with Allied and Sonicwall products). Have an issue with getting an 1811 router to talk with the outside world. Outside IP: 209.218.110.68 Inside IP: 192.168.1.254 Router can talk fine to the net, but internal workstations are not. They can ping... -
-
Cisco 1811 Newbie Question
So I am fairly new to Cisco routers (deal with Allied and Sonicwall products). Have an issue with getting an 1811 router to talk with the outside world. Outside IP: 209.218.110.68 Inside IP: 192.168.1.254 Router can talk fine to the net, but internal workstations are not. They can ping... -
Routing through T-1 Interfaces w/ 1841
K, I have everyone talking with each other, just can't get out to the web now!!! Assuming its a NAT thing now.... -
Routing through T-1 Interfaces w/ 1841
so should the access list on the main office routers just include all IP's on all subs? -
Routing through T-1 Interfaces w/ 1841
topology for internet access would be (from the remote site).. PC-Remote Router-Main Office Router-Pix-Internet. Each Main office router has 2 WICS (one for each remote site). The central office's default interface would be FE0/0, and yes, all remotes site would go through the main office for... -
Routing through T-1 Interfaces w/ 1841
attached are 2 routers, one from the main office (CFHS) and one from a remote office (Patter)..... Includes running config, sh ip int and sh int...... ***Main Office*** Current configuration : 2227 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime... -
Routing through T-1 Interfaces w/ 1841
I can post the SH tomorrow AM, but yes, each router at the main office has 2 WIC's in them. These are over digital PTP connects. I tried them in the lab using a t-1 crossover (know the cable is good) with the same results.... The line transfer is good, I just think it has something to do with...
