Recent content by anthonymeluso

Cajuntank, Thank you again for your time. I think I got it laid out now.

Sorry to sound dumb here but by DMZ do you mean another server in your DMZ or something else?

Thanks again! For the public access web site can you place it on any interface or VLAN? Also, what does your VSC look like for your guest network in terms of authentication, access-control, ingress and egress networks, and bindings to APs.

Cajuntank, Any ideas on my configuration. I also posted this question in the HP forums and my only response was someone from Turkey in broken English. Thanks again!

Yeah two wireless controllers for redundancy. We are planning on installing over 90 APs through out the campus. Now with the limitations that come with teaming controllers, I have no idea what my VSC for guests will look like. What would be my ingress port (if I even need it) and what would...

Cajuntank, I just read that I can't have a DHCP server running when I have teamed controller. So would a DHCP relay work and have it point to your our internal DHCP server? How would it know what subnet to assign it? Thanks so much.

I just realized today I was looking at the older Wireless Edge Services module not the newer 765zl one lol. I just read this post again and everything make so much more sense now. I think I'm going to do the following setup that is similar to yours the "Secure" SSID will only authenticate...

Thanks. I just had read somewhere that the radios communicate over VLAN 2100 and was wondering if this needs to be created on my other switches.

Cajuntank, Sorry to bother you again but while I understand how this type of environment would work, what happens if I have more than one switch on my network. For instance the wireless edge service module is installed in the MDF but I have radios connected to my IDF switch as well. Would I...

We have implemented a DFS namespace that replicates with another server. This work very well, however if a server goes down the time that the referral kicks in can take a while. I noticed that the cache duration for the namespace is 5 minutes and 30 minutes for the folders. If I lower this...

Ok thanks. Yes its internal traffic so all should be well there. You have been of much help! Happy new year!

Ok so I performed a little test today. On one of my switches I turned on ip routing and enabled a helper-address on one of the VLANs. When I connected a client to one of the VLANs untagged ports I get the correct DHCP address for that VLAN. My only concern is from a security perspective...

Cajuntank, Thanks for all your help. I was actually told by an HP rep that if you have a infrastructure in place just use that instead of the switch and the controller as a DHCP server and firewall. So right now everything goes through my ISA server. So essentially when a client connects to...

Ok thats a little clearer now. Let me post my understaning of this. Ill setup the ethernet side of the controller with two ips one for each vlan id. These would match the same setup that is on my switches. I will them setup two SSIDs and assign a vlan id to each. On the physical switch port of...

Yes ill be using a wireless controller. I know I can setup different SSIDs and assign VLANs to each one in the controller, but the APs that are connected to the switch wouldnt I have to tag that port for both VLANs?