Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by AnthonyHardy

  1. AnthonyHardy

    Who provides voltage?

    We have incoming analog DID's and I am trying to figure out how they work (we're changing to an asterisk phone system). Does the analog DID basically act like an analog phone connected to us? I know that when you dial one of our DIDs from the outside world you can hear the telco using dtmf to...
  2. AnthonyHardy

    Disable/Enable MC32 from CLI

    Hey guys, I have an MC32 acting up. I cannot for the life of me remember how to disable/enable it to reset. What ld is it? It's slot 10 on my system .. grrr. I curse myself for loosing old logs where I did this a lot a few years ago.
  3. AnthonyHardy

    Nortel Routing Change

    Ah . nm. Changed the remote switch to send 51 to the main switch and then I could setup a DSC for 51 to be pushed to the system handling long distance. THanks for taking the time to post assistance, firebirdscrambler. I do appreciate it. ALso, thanks to this whole forum, as most of my digging...
  4. AnthonyHardy

    Nortel Routing Change

    OK, got that the remote site had an ACOD of 5 on it's ROUT coming back to the main switch (missed that earlier). Setup remote switch so it will send 5 alone to the main CS1000. Somewhere in the main switch there is something preventing me from creating an acd, a dsc or anything with 5. Trying...
  5. AnthonyHardy

    Nortel Routing Change

    ugh. having a time trying to figure this remote site out. They dial 51<area code><number>. There is a DGT that removes the 4 and inserts a 4. Using dch messages, I can see the main site is getting 4<area code><number>. What I want to do is just have the remote site dial 5, come to the main...
  6. AnthonyHardy

    Nortel Routing Change

    OK, figured out something, finally, at least partially. Changed ACOD on ROUT 3 away from 4. Changed ACOD on ROUT 11 (to system where new ld lines are) to 4. Added a DSC of 4 and now I can dial 4 and get to the new system where I can wait on the full number and do what is needed. Now, to get...
  7. AnthonyHardy

    Nortel Routing Change

    Well, no luck. The spreadsheet has issues (won't parse my files), so that doesn't help. Any other hints? I obviously don't know how 4 is working. I change the ACOD of ROUT 3 (normally 4, change it to something else, 8911 for example), and dialing 4 gets a fast busy (makes sense). I then...
  8. AnthonyHardy

    Nortel Routing Change

    Haven't had a chance to try the excel sheet, but will first thing in the morning. Tried changing the ACOD or ROUT 3 to something else (was able to) and then changing the ACOD of ROUT 11 to 4, just got a fast busy. I thought perhaps I could do a DSC, but it doesn't allow full 10 digit plus code...
  9. AnthonyHardy

    Nortel Routing Change

    CS1000 involved: We're changing our ld lines to another switch (already connected to the cs1000 via pri, functional). Currently, we dial 4 to access ld lines (8 tie trunks on the cs1000). I need to re-route that to the other switch across the PRI. I've been doing a lot of searching...
  10. AnthonyHardy

    Asterisk to CS1000E via TMDI PRI

    BigPhoneDaddy, The full nortel config is posted here: http://www.tek-tips.com/viewthread.cfm?qid=1558440&page=1 Our call quality is good, but we had some intermittent issues with the PRI "going down" on the nortel side but showing up on the asterisk side (calls not working either way). I have...
  11. AnthonyHardy

    Asterisk New-bee here. Trying to setup a test server at home

    reelbigfish, can you get to the internet from the asterisk box? perhaps just pinging the phone? Can you ping the phone from your xp pc? Making sure the two can talk using ping is your first goal. Some vm's have networking issues and need a little tweaking on the vm setup side (not the OS side)
  12. AnthonyHardy

    Redirecting Phantom Extensions

    yea, ACD's seem to work properly:). I found someone else recommended using acd's for perma forwarding here somewhere else. This forum is so awesome:) . .thanks to past posters!
  13. AnthonyHardy

    Redirecting Phantom Extensions

    should I perhaps use ACD instead of phantom forwards? I'm looking for documentation on trying this and not having any luck yet:(.
  14. AnthonyHardy

    Redirecting Phantom Extensions

    using a diff extension now for testing, set SFA, same thing: DES REID1 TN 065 0 00 04 PHANTOM TYPE 500 CDEN 4D CUST 0 WRLS NO DN 7611 0 MARP AST NO IAPG 0 HUNT 7976963 TGAR 1 LDN NO NCOS 3 SGRP 0 RNPG 0 LNRS 16 XLST SCI 0 SCPW 123 CLS CTD DTN FBD XFA WTA THFD FNA HTA ONS LPR...
  15. AnthonyHardy

    Redirecting Phantom Extensions

    update . .. it seems that this (fast busy or callpilot forwarding) only occurs for the first few seconds after a call is made. If I dial an extension, wait a few seconds and dial it from a second phone while the first is still ringing, it works fine. The main thing I've found was this: DCH 10...
See more

Part and Inventory Search

Back
Top