Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by angelhdz

  1. angelhdz

    DeviceTransientConnection Error

    Thank you very much!! I give you a star. I didn't realized that it had the name instead the IP Address, maybe it change because I have defined a ip name-server on the router. Now I have another problem, the controller E1 doesn't comes up... maybe is the jumper in the HDV that needs to be...
  2. angelhdz

    DeviceTransientConnection Error

    Thanks whykap!! Here is the show ccm-manager: 2851-SLP#sh ccm-manager MGCP Domain Name: 2851-SLP Priority Status Host ============================================================ Primary Domain Name Unresolvable ccmslp First Backup None Second Backup None...
  3. angelhdz

    DeviceTransientConnection Error

    I'm trying to establish an MGCP connection between a Cisco 2851 and a CCM 4.2 with a Siemmens Hicom 300e. The router has a NM-HDV2-2T1/E1 in slot 1, and a VWIC-2MFT-E1 in subunit 0. This is the error I get at the event log in the CallManager Error: DeviceTransientConnection - Transient...
  4. angelhdz

    Corporate Directory not shown through PhoneProxy

    Come on people!! Please, helpme!!
  5. angelhdz

    Corporate Directory not shown through PhoneProxy

    Hi you all!! We have a PhoneProxy and the phones that are registered to it (IP Communicator ver 2.0 and 2.1, 7940, 7960 and 7970) are showing this message "Host not found" when you select the Directoy key, and then you notice that the corporate directory is absent. The url directories is in IP...
  6. angelhdz

    Cisco IP Communicator With Tandberg

    OK, I have solved this issue, sorry for post too late. I just uncheck the Media Termination Point Required option at Phone Configuration (Tandberg as H323 device) Regards.
  7. angelhdz

    Cisco IP Communicator With Tandberg

    Hi!! I have added a Tandberg 880 to the Call Manager (4.2) as an h323 device and assigned an extension number; also I have configured the regions to speak only g711, but we have the following issue: When we call from our IP Communicator and the VT Advantage to the Tandberg, the people that are...
  8. angelhdz

    HOW TO INSTALL CALL MANAGER 4.X ON A REGULAR PC

    Did you do this? Registry hack: [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model] “Hardware”=”MCS7835” “Memory”=”1024” “Speed”=”733” [HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Image] “Version”=”2000.2.5”
  9. angelhdz

    CDR Analysis and Reporting tool doesn't work

    Hi!! I bring this post to life again because when I login with admin/admin I get this error : [LDAP Access Error. Contact System Administrator.] I did what tuffgong said and cannot get access? Can anybody help me?
  10. angelhdz

    Unity Connection

    Does anybody have installed a Cisco Unity Connection on a generic Hardware. I already have one Unity Connection 1.1 server, but in a Cisco Hardware (IBM x206) and I want to install it on a PC (even in a Virtual Machine, like the callmanager) but I receive a message that the hardware its not a...
  11. angelhdz

    CDR Analysis

    Thanks, I already have read that document before, and I don't have the DC Directory password, I used Directory Manager as User and ciscocisco as the password and didn't work.
  12. angelhdz

    CDR Analysis

    I have the same situation, admin/admin does not work for me. In the Local users and Groups I found the users CCMCDR but i don't know if there is the correct user, also I don't know the password, can anybody please help me?
  13. angelhdz

    CM User Options Log on not displayed

    I still having issue whit the page, please help me!! I got this error Error Type: Microsoft JScript runtime (0x800A138F) 'undefined' is null or not an object /ccmuser/_top.asp, line 77
  14. angelhdz

    CM User Options Log on not displayed

    I'm trying to get the webpage for the users can configure the speed dial, etc. but i get an error "The page cannot be displayed", is there something that I forget to activate? becuase I already have another CCM 4.1 and its working fine!!
  15. angelhdz

    isdn switch-type primary-5ess

    Thanks, sorry, I already do that, I tried a debug isdn standard and got the error "out of network", so, I realizaed that i have my gateway on ccm wrong (IP from gigabiteheternet, instead of Serial) so I proceed to change the IP to the Serial IP and tried again the debug because did not wrok :(...
See more

Part and Inventory Search

Back
Top