Recent content by AndyJG

Hi Greg, Try to use SSH Sentinal ver 1.4 for the VPN tunnel but there are so many settings. I've checked the thread you've listed my it's no help to me. Any tips?

I believe you require GRE (protocol 47) for PPTP to work correctly. Try enabling it. Also, do you have TCP port 1723 forwarded to the server? Andy

Hi Greg, I'll settle for Client to LAN right now. It's the same system as before.. Windows 2000 Server behind WRV54G and I would like to connect from home using XP or 2000 Pro. I've configured a security policy from XP with the one suggested by Linksys. When I ping the LAN Network address I...

Hi Greg, Have you had any luck with the VPN tunnel on this router? I've configured it according to Linksys instructions, and only get as far as "Negotiating IP Security" when pinging the router's LAN IP. Any thoughts on this one? Thanks, Andy

Hi Dave, Create a forwarding rule using either TCP/UDP or both. Name the rule GRE. Use port 47. Go into Config management on the WRV54G and download the current config. Make a backup just in case something goes wrong. Edit this file and look for "GRE". Replace the protocol numbers (6) or (17)...

Hi Greg!! I was able to try this out and guess what.... IT WORKED!!!! You are the BEST!!! Thanks so much, would still like to establish a tunnel next if possible. Andy

Hi Greg, Just to let you know I haven't had a chance to try this yet. Probably won't until Wednesday now. Have you had any luck with setting up a VPN tunnel on this router? Thanks, Andy

One more thing, is this not the same as DMZ to the server? Andy

Also, will this affect the forwarding of normal tcp ports required for http,ftp....

Hi Greg, The last time I forwarded all ports (0-65535) both tcp/upd, I lost remote control. Not sure I should forward all ports. What do you think?

Hi Greg, yep already been to that site. The configuration file does look like what you show. Also, I see the telnet ports 23,8023 and 992 in the configuration. Will I be able to change the configuration from remote as I am not at the site? Thanks, Andy

BTW, The port scanner says this port is "Compaq WPC" if that helps. Andy

Hi there, I should get your name so I don't have to say Hi there. Anyway, I did as you suggested and lo and behold port 2555 comes up interesting. When I telnet to that port it connects, blank screen and when i hit enter i get the following: HTTP/1.1 500 Internal server error DATE: Fri, 19...

There is remote management at port 8080. This is what I use to change the settings from remote using the web browser. If I telnet that port I get html code and the connection is lost. The drop down menu for remote management is 80 and 8080. If I use 80 nothing happens. Any ideas?

Hi, I still cannot telnet to 8023 even with the firewall disabled and on the LAN side. I get "Could not open connection to the host, on port 8023:connect failed" I'm so frustrated. BTW I did try the VPN with the firewall disabled.. no luck!