Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by amscot

  1. amscot

    Powevault 220

    I got it back. One of the Dell techs over at Experts Exchange came up with a solution. Did the last drive that failed force back online, combined with about 4-5 chkdsks on reboot, then replaced the first failed drive with a new one, force it to rebuild, another few reboots with chkdsk, then...
  2. amscot

    Powevault 220

    One power supply had failed, the device was turned off. On restart, the virtual drive the array was made up from didn't appear on the server. Checking Dell server manager, it showed the array as "Failed" with two drives failed. It's a RAID5 of 14 disks into one virtual volume connected to a...
  3. amscot

    Powevault 220

    Can anyone lend some advice. I've replaced two drives in our Dell Powervault 220, now the server dosen't see the array, it was set as a virtual drive. In the sever manager the drive array state shows "failed". Do I use the PERC utility to "Rebuild"? I don't want to lose the data in my array...
  4. amscot

    Sharepoint Services 3.0 and internet

    Can some one point me to a step-by-step guide to setting up sharepoint services (3.0) with internet access? No ISA, simple one server setup with 1 NAT'd IP. Thanks
  5. amscot

    4506 and CiscoView 3.0

    Sorry, my mistake. It's Cisco Network Assistant 3.0, it shows as having the 4506 (and all modulules) built in. I must be missing something as all the 2900 & 3500's are showing up.
  6. amscot

    4506 and CiscoView 3.0

    Just installed and configured a new 4506, but when I try to add it in Ciscoview it comes up with "Unsupported device". HTTP server is enabled and port set per docs, ping is good from Ciscoview console station. Any ideas?
  7. amscot

    IMAP problems

    Same here. Did you find a fix?
  8. amscot

    1 user can't recieve

    We keep getting the 5.1.1 error message when sending to only one user. I've validated his mailbox, account, SMTP addresses both internaly and using www.network-tools.com He's set up identical to everyone else. Anything else to check? Maybe in his Outlook 2002 on his workstation?
  9. amscot

    Routing DSL-Cable-Exchange

    Can this be done? Situation: company has numerous small remote site WAN's with cable modem/routers. They have an exchange 2000 server for internal mail and an cable ISP that also handles internet email and hosts a domain. Both the Win 2000 domain name and internet domain are the same, SMTP...
See more

Part and Inventory Search

Back
Top