Recent content by all4it

Currently my PIX 501 version 6.2 is working without any problems, but within the next 2 weeks I will be changing the configuration for SuddenLink IP addresses from MCI's. I have no problem saving the configuration to my TFTP server but how do I restore the configuration to the PIX 501 from my...

Thanks everybody, I will attempt this change out after I take a few days off. Have a good day. Roy

Tony, sorry it took so long, it has SATA drives and there are two additional ports on the MB. Roy

Thanks, I have to increase my storage so I want to install the 500 GB hard drives and replicate the existing data to the new hard drives.

I have a Dell Dimension 8400 Pentium 4 3.00GHz with 2 GB of memory that currently has raid1 enabled with 2 149 GB disk drives. I will have to replace the hard drives within the next month because the available storage is down to 27 gb. We use the PC for imaging and each week we add 2000 tiff...

Tom, problem fixed, rebooted system. Thanks for your help Roy

Tom, the two ext, are 2282 & 2279. I did check each ext. for call forwarding and made sure they were not forwarded. I can not get to the extensions right now becuase the employees are still at work. I will post back later. Thanks

It shows one ext. 2200.

After the move, the have the correct ext. and voicemail. Are these positions QCC operator positions if so, I do not need QCC system operators.

Sorry Tom, they have the correct extensions. Thanks for your help

No tdaugirdas, I said I had very little experience working with this phone system, I'm aware that each port on the 408 boards have a specific extension assigned to them and all extensions are working except when the two employees noted in my first questions receive outside calls the extension...

We have a Merlin Legend R3 processor with 2 408 GS/LS-MLX boards, and one 007 MLM voice mail with 2 voice mail ports with MLX-5D phones and a MLX-20L console. I had to move our company operator and two other people out of their offices to other locations within the same office area and they all...

Sorry but I did not see an entry under the Communications Rack for LinkSys, but I know somebody out knows the answer to my problem in this area. I have to install a LinkSys router BEFSR41(4 port) to an existing DSL/cable modem from Cox cable. This system will serve as the backup to the...

We have started buying new PC’s with Windows XP Professional and we will be controlling each PC with an administrator profile and user profile. The PC’s will be connected to our LAN and will be using our existing file server. I used the administrator profile to load our virus protection...

Currently we have a CISCO 2600 router handling our internet access on a fractional T1 dsu/csu module for fourteen employees and paying close to $1000.00 a month for the service from MCI. Last week we had an outage that shut us down for an extended time, which in turn had the president of the...