Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by AlfonsoSF

  1. AlfonsoSF

    adaptec 2405 raid controller firmwre update

    Hi. I am new in this forum. I have an Adaptec 2405 raid controller. I have this model in other machines with no problem. But the last one is giving me troubles. I want to add to arrays Crucial SSD MX500 units and WD 4002FYYZ HDD units. Those are not allowed. Other older HDD yes. I nedd to...
  2. AlfonsoSF

    how to configure a port with two or more vlans

    Hi, I have a 4850 gts pwr switch. I have no experience with it. The switch is connected to a sonicwall firewall from one switch port to the lan sonicwall port. This port is int he default vlan 1. (vlan 147) In the sonic port I have a virtual interface (vlan) with the same Id that in the...
  3. AlfonsoSF

    IP500V2 11.0.4.6 & Avaya Workplace for IOS - no calls presented when app is in background

    Hi guys. I have the same problem. Only with iOS. The scenario is a IPO 500 v2 + oneXportal + SBC. In our 46xxsettings, IPOLackey's suggested lines are writen, and tryed 411 and 443 . The URL is the IPO one. But we have no success. We have no Spaces license Any suggestion ?? Thanks in...
  4. AlfonsoSF

    outgoing caller ID in international calls

    Yes , they do. In fact, if I try to send +346nnnnnnn (my cellular) to Usa Calls and it works. As I understand, they want to see +countrycode at the caller-id beginning. But if it is +1 they drop the call.. That's what the provider told us
  5. AlfonsoSF

    outgoing caller ID in international calls

    After a lot of tests the result is: If I call to a USA number with the NS code with a Spanish number (+34nnnnnnnnn) the call is correctly done, showing the spanish caller ID. If a set the Ns code with +17862nnnnnn the call does not progress. If we set the ns with 7862nnnnnn, whitout +1 then...
  6. AlfonsoSF

    outgoing caller ID in international calls

    I have a Ipo500v2 R11.1.1.0 working in Spain A sip trunk configured and worquing. The registering sip uril is setup with all fields as "internal data". one ARS as "main" which is sending caller ID as the "principal number" and it works fine We also have a number placed in Miami for calls to...
  7. AlfonsoSF

    can't register sip j159 terminals

    Hello: We have a problem registering SIP J159 terminal. Without using TLS with TCP, this was working without a problem. When a terminal is restarted, it registers wit no problems. Suddenly, we find that, when we restart a J159 terminal, we have an error in the registry. Now we have...
  8. AlfonsoSF

    Record calls without VMPro

    Which release is the IPO working?
  9. AlfonsoSF

    click to dial from Dolibarr to IPO500

    Hi, I must to make possible "click to dial" from Dolibarr (open source based on LAMP and accessable via web erp/crp) to the IPO500. Do I need an extra software ? or may I use one-x-portal ? I never did that. Thanks in advanced
  10. AlfonsoSF

    authentication error

    Thanks a lot. I was affraid because I have other 3 phones working properly, but in their case, the vpn is the built-in and this one I amb in a different vpn. So, the matter was tue H323 tls signaling. Solved !!
  11. AlfonsoSF

    authentication error

    Hi I amb starting to feel incompetetent I have a 9608 at home. I have VPN with the office. (site to site) New H323 extension created. End point and power user licenses available. User created for this extension. Passwords for telephone at the extension tab, user and telephony/supervisor are...
  12. AlfonsoSF

    SBC under KVM (proxmox)

    Finally I abandoned proxmox for this time . I instlled vmware + Veeam. And I'll install sbc under vmware
  13. AlfonsoSF

    problem accessisg one-x portal for configuration

    Finally was a problem with the certificate and Chrome. Passed with Firefox. Thanks !!!!
  14. AlfonsoSF

    problem accessisg one-x portal for configuration

    I have an IPO 500 v2 R11 and a apps server linux VM Web manager, voicemail , management services and web license manager are in green. VM Pro is working fine. But One-x portal is in yellow. Via 7070 port, one-x Portal is in green. If I try to access to "One-x Portal" in the "applications" tab...
  15. AlfonsoSF

    Avaya IP Office 500 V2 Problem With Incoming Calls Not Ringing From Analog Trunk.

    Perhaps you can play with the Ring persistance at ring detection in analog options. Sorry if I don't translate well. My manager is in spanish. Normaly , in Spain, we have 400 ms. You can try a lower value.
See more

Part and Inventory Search

Back
Top