Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Albion2000

  1. Albion2000

    Siemens H4K V5 and receiving SIP INFO packets Failure

    Hi IamNotThere, Sorry for the delay in replying. I shall have a look at the AMOs for LCR and Dialplan. (I normally use Assistant to look at / program these, but I know that the AMO's can sometimes present things a bit more clearly. LCR on the Siemens is not alsways the most logical programming...
  2. Albion2000

    Siemens H4K V5 and receiving SIP INFO packets Failure

    Hi IamNotThere, Thank you for your latest post. I had a good read and a think. I am not entirely convinced either that dropping the LEGK will make any difference. But I am still thinking on it. I had a look in the WireShark traces for INVITE packets leaving and being sent to the Avaya. Nothing...
  3. Albion2000

    Siemens H4K V5 and receiving SIP INFO packets Failure

    Hi IamNotThere, Sorry to confuse you with the codecs - suffice it to say that I am playing around with various codecs as I am looking at codec negotiation order in the SIP traffic to/from the Conference server. (And working with mostly European environments but some US environments very...
  4. Albion2000

    Siemens H4K V5 and receiving SIP INFO packets Failure

    HI all, Thank you for taking the time to respond. it is appreciated. we have found a setting in the Conferencing side that may reduce / stop the SIP INFO being presented to the Siemens quite so often, so we are going to experiment with that, however anything I can learn about the Siemens side...
  5. Albion2000

    Siemens H4K V5 and receiving SIP INFO packets Failure

    Hi All, I hoping someone would kindly offer me some advice regarding a Siemens H4K V5 and SIP. I have a H4K V5 on fairly old software.[RMX V5 R0.5.28 / UW7 V5 R0.17.0] At the moment I have connected the Siemens to a Non Siemens Conference Server via SIP trunk configured on an STMI4. Calls are...

Part and Inventory Search

Back
Top