Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by AlanMcD

  1. AlanMcD

    Nortel MICS 4.1 Access Denied

    Finished going through the "Install" but I seem to not have a dial tone on any phone. I only have one telephone line coming into the system. Any external calls go straight to service-provided voicemail. No inbound calls ring on handsets. I am a rookie at programming the Nortel system but have...
  2. AlanMcD

    Nortel MICS 4.1 Access Denied

    Forgot to note there was a stuck key on the 7310. Freed one of the three keys right under the LCD display. Then the Feature key responded.
  3. AlanMcD

    Nortel MICS 4.1 Access Denied

    Found out I had to disconnect and reconnect the power and then within 15 min try to "restart". That worked, I am now able to go thru the installation. Thanks for your help! I am wish to keep this thread open until I finish the install just in case i need further assistance.
  4. AlanMcD

    Nortel MICS 4.1 Access Denied

    I got my 7310 "Feature" button to work. When I run "STARTUP", I get a message displayed "STARTUP DENIED". Any suggestions?
  5. AlanMcD

    Nortel MICS 4.1 Access Denied

    If the "Feature" key is not working on my 7310, what are my choices? Has anyone repaired a phone before? I was going to open it up and see what I can see. I am hoping that the key is only stuck with dirt or something else. Thank you everyone.
  6. AlanMcD

    Nortel MICS 4.1 Access Denied

    The problem happens on all the phones. I believe the 4 phones I have are 7308's. I have one 7310 but the feature key does not seem to function. I get the power up sequence with the time displayed on the 7310.
  7. AlanMcD

    Nortel MICS 4.1 Access Denied

    Thank you for getting back so quickly. I did the suggestion but, the results are the same. Anything else I can try?
  8. AlanMcD

    Nortel MICS 4.1 Access Denied

    When trying to access debug, system reset, config, admin, or install I get "access denied" displayed. The Norstar system worked fine until a phone was knocked off the desk and I believe some of the keys were pressed by mistake. Now I cannot get a dial tone when selecting any line. If I select a...
See more

Part and Inventory Search

Back
Top