The ANA6911 won't work because Adaptec stopped building it, there are no drivers for win2k - you should consider using the 4port EN card or the newer version of the Adaptec card. NAI can tel you which cards work with what OS.
If PHY errors aren't critical, try another NIC, shouldn't matter as...
Well Sniffer will do that - set a filter to capture all the traffic between the 2 machines and there you have it - you can limit the filter to watch a particular conversation if you'd like.
http://www.sniffer.com
-Andy
Best PCMCIA NIC?
EN= Xircom CBE2-100BTX Cardbus NIC
TR= Madge Smart Ringnode Cardbus NIC
Fibre:
Sniffer Optical
PoS= Snifferbook Ultra
DWDM Sniffer Pro
Sniffer Pro LAN
Xyratex Gigabit Ethernet PCI Adapter
Full Duplex Pod (you'd have to span to a monitor port on a switch)
ATMBook from Sniffer...
Aside from ordering the parts from NAI, you can build the cables yourself, customize the length, etc. you can find the pinouts and specs here:
http://download.nai.com/products/media/sniffer/support/SND/wannb540.pdf
Starting at page 3/17.
Here are the part numbers I was able to dig up on the...
OK, I got this right out of the Sniffer Knowledge Center:
Error "Failed to create empty document"
Error "Unable to connect to remote expert"
Starting a capture using DSPro 3.0 Agent
Connecting to a DSPro 3.0 Agent
Problem Environment:
Microsoft Windows NT
Microsoft...
DSS/RMON 3.0.10 will run under Windows 2000.
Having said that, I still recommend an upgrade to 4.x because unless you get a Sniffer tech who is in a particularly good mood, the 3.x under 2K configuration is not supported. The error you are getting may be a DCOM issue; there could be several...
Elca,
Could you send me a trace of the conversation? I can sit down with the trace file and some of the decode guys and see what is happening. Also, please go back over your setup one more time to be sure it isn't a simple matter. I've seen NICs auto-negotiate for 10MB on a 100MB segment...
I found this in the Sniffer support website:
Unknown Ethertype decode in WAN
Error Message
This could be caused by a proprietary Frame Relay header or one that is not supported by Sniffer Pro
The "0021" & "0031" Hex values are PPP's LCP values and not Ethertype...
Elca,
Yikes! Looks like there are incorrect protocol settings. What topology are you sniffing? Have you configured the sniffer to let it know what traffic type your looking at?
-Andy Lail
Simply stated, most of us need to see the BW numbers and know who is using it. Graphs and charts help me explain to my boss what is happening and why, but for real in-depth analysis of what is happening on the link and tool like Sniffer is the right one. I use it to baseline my link, then...
1 - The location of the Agent list on the Console is:
\Program Files\NAI\DSProConsole\Data\DSProView.mdb or wherever they installed the agent software.
2 - The location of the User list and password on the Agent is:
\Program Files\NAI\DSProAgentNT\Program\SnifferProb.act or...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.