Recent content by ajfischer

I've got a Opt11C (25.4B) with a 3rd party voicemail on it...has a problem with trunk calls to exts that are forwarded to VM. When a trunk call is forwarded from an ext. the Nortel sends a TN# or prefix number before the ext. number (i.e.- if a trunk call is forwarded to VM from ext. 200....the...

Having a wierd problem....as usual when trying to delete a analog extension...we are prompted to remove any BLF/DSS appearances that the phone has on other supersets....and the systems nice:-) enough to indicate the Bay/Slot/Circuit of those supersets that have the appearance...but once we...

Have a "PAG" trunk/route (ACOD of 80) connected to a Bogen zone paging unit...for (3) different zones...analog phones work great...dial "80" get tone back from the paging unit then dial the "zone number"....but my digital phones are not sending DTMF after accessing the PAG route so I can't dial...

I was always under the impression that the 2250 console needed (4) digital ports....(2) primary and secondary TNs and then (2) PWR TNs....I was moving an existing, working console and happened to remove the (2) PWR TN connections first and noticed the console still works!! Obviously I was under...

We are looking at bringing in a number of BCM50 systems into are Telecom program for students to train on....any feedback...good, bad, ugly?? Thanks!!!

What is the easiest way of restricting trunk access on a analog phone and having it dial/receive internal calls only?? Thanks!!

Can you give me a little more info...lets say I'm using procomm. Thanks!!

Anyone know a quick way of adding a range or a bunch of NPAs or NXXs at one time in LD90...instead of one at a time??? Are there any "wildcards" like 1-8XX...so this would cover all NPAs that start with (8)...any ideas?? Thanks!!

I actually need the contact closure from the Nortel to control a strobe that will activate when someone accesses the PAG route...the paging works fine...I just need a contact closure....every other system I have worked on provides a relay that will activate when someone accesses the paging...

I'm using a trunk port as a external paging port/route...when a user accesses that route to page I need to get a contact closure....does the system offer one anywhere?? Thanks!!

We have recently implemented using Group and individual page call over the speakers of our 4025 and 4150 supersets....but on the majority of the phones the speaker volume has to be increased in order to hear the page...which is fine....until a call comes in for that extension....then the ringer...

Can you use 81C cards in a 11C???

Excellent...works great!!! Thanks kwb!!

I need to supply a loop start trunk port for paging.....I picked an unused bay/slot/circuit...gave it a trunk number...programmed it as a CO line appearance on a key on all my supersets....but when you select the line I get (what I assume) is ARS dialtone back instead of being immediatley...

I've got about (110) superset phones (mixture of 4025, 4150)....is there anyway to send a "group page" over the speakers of all the phones at one time....like if we wanted to announce an emergency??? right now we do not do any voice paging over the phones....when you call a superset they simply...