Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by AdmanOK

  1. AdmanOK

    Vonage Connection?

    It's not a Vonage specific issue, the hardware I'm using doesn't support it, which I why I wanted to bypass the IP --> Analog --> IP conversion.
  2. AdmanOK

    Vonage Connection?

    No problem... here's the relevant config sections: voice-port 1/5 supervisory disconnect dualtone mid-call connection plar 2001 impedance 600c description Vonage XXX-XXX-XXXX ! ! dial-peer voice 9 pots destination-pattern 9T port 1/5 ! dial-peer voice 2000 voip destination-pattern 2...
  3. AdmanOK

    Vonage Connection?

    Has anyone tried to use a Vonage line to get PSTN connectivity on a CallManager system? More to the point, has anyone got it to work? If not Vonage, then what about any other VOIP providers? I currently have my Vonage line hooked up through an FXO port, but it is on a VERY old MC3810 and does...
  4. AdmanOK

    Which table are the user details stored in?

    That information is not stored in a SQL table. It's stored in the DC Directory LDAP database.
  5. AdmanOK

    Recommend Voice Gateway

    The VIC-2FXO-M1 is supported on the 2621, I was saying that the VIC2-2FXO is not supported on that platform.
  6. AdmanOK

    Recommend Voice Gateway

    To support Caller ID you need to make sure that you have the correct FXO card. The part number should be VIC-2FXO-M1. A standard VIC-2FXO will not pass Caller ID. A VIC2-2FXO card will also support Caller ID, but it is not supported in the 2621. Also the gateway must be set up as H.323 in...
  7. AdmanOK

    Security and Encryption Gotchas?

    I have a customer that is wanting to implement encryption of the signaling and voice streams on their IP Telephony system on the recommendation of an external auditor. I've not actually deployed a voice network with the security features activated. Are there any potential issues with doing...
  8. AdmanOK

    Listening to .wav files on the new Cingular 8125

    Check out TCPMP - http://tcpmp.corecodec.org/about
  9. AdmanOK

    Probelm with caller ID to Sprint PCS only

    I used to have the same problem with sending Caller ID information to AT&T cell phones. It was because of the configuration of the gateway in CallManager. The numbering plan and IE number type were set to Cisco CallManager... by changing these to ISDN and National I resolved the issue.
  10. AdmanOK

    GoodLink Schedule

    I have traditionally been a mobile activesync user, but just started using GoodLink instead due to a job change. On mobile activesync I had the ability to choose the hours that stuff got synched up at, but I can't seem to find the same feature in the Good software. I really don't want to be...
  11. AdmanOK

    recovering password from Cisco Call Manager

    FDISK?
  12. AdmanOK

    Ringtone Audio Files

    I have the CTU ring as well as several other "normal" ring tones (The FT-200 ones) on my site at http://www.adman.net/cisco/ringtones.
  13. AdmanOK

    Cisco VoIP & Bogen Paging Solution

    A Bogen TAMB requires an FXS port anyway, and will not work with an FXO. If you have an FXS port in the router this should work just fine, otherwise an ATA device as suggested by jpm121 will also work - this is what we use to hook up our Bogen units.
  14. AdmanOK

    Cisco Unified Messaging. User doesn't want emails.

    Do *not* create a rul to delete the emails. In a unified messaging environment the email *IS* the voicemail, if you delete one you delete the other. This was the one thing that had a kind of long learning curve for us when we deployed. People kept deleting the emails and wondering what happened...
  15. AdmanOK

    How to display a pdf file

    If you want to show the PDF as part of the page, with other contents around it you could use frames and set the source of one of the frames to the PDF file. Check out http://adman.net/resume/frames.asp for an example of how it would work. Inline frames would also work.
See more

Part and Inventory Search

Back
Top