Recent content by adamsd

Hi! These fileset are AIX4.3. It depends if you want some of them like 64bit file sets. In any case if you want to remove these messages I suggest that youi install these from teh AIX4.3 CD and I am not sure about the NetQ fileset. Good luck!

Try "rsync". If you don't have it installed do a search in the web and down load it and look up the man pages. Its the BEST.. if something stops the data transfer, when restarted it will sync and start from where it stopped. I have used it and do large data transfers. You will also have to set...

Hi! Try this and see if "rstate" changes: nim -o reset aix5202generic-mksysb

Hi! You have to uninstall the man pages and reinstall using smitty. This should work because I had the same problem on a number of servers. Cheers,

axelsche has answered your question. If you are not happy with that then remove the bos.sysmgt.nim.master 5.1.0.0 and bos.sysmgt.nim.master 5.1.0.0.

Need more info like output from "instfix -i |grep ML" and "lppchk -v".

sorry I ment "two machines that dont hang"... In fact it is three machines, one ML3, Ml4 and Ml5

Hi texaix, - Both machines are on the same subnet I can ping the ip address of the printer from both machines. - Yes the printer is on a different subnet - It hangs for root user, I havenot checked for other user id's - All filesets are on the same level on all machines, now I have two machines...

HI ogniemi, I have done that even removing the qconfig.bin file.

Hi! I am really confussed about why lpstat hangs on one box and not on the other both are AIX5.1 servers, both have smilar entries I have tries everything I can find in this forum. What Aixqueen suggests. But still the lpstat -t hangs like so: (/etc)> lpstat -t Queue Dev Status Job...

Hi, I think they must have suggested NIS.

I have the entry in the /etc/inittab file. We are running AIX5.1 on a p670 (LPAR). These configuraton files was copied accross from an AIX4.3 TSM server by someone else. Below is an extract from my inittab file: autosrvr:2:once:/usr/tivoli/tsm/server/bin/rc.adsmserv /dev/console 2>&1 #Start the...

Hello, I am having a some what similar problem. The shedular process does not startup at system reboot. I have looged this with Tivoli support, but they are still trying to find the problem. I can start the process from the prompt no problem. Cheers Dexter

Hi, By mistake the filesets on one of our client nodes was deleted, these included API-DB2 backup images. We have TSM database backup tape that was backed up using a L12 IBM Tape library - 3575. My question is can I restore the TSM database to a test server that I have TSM5.1 already installed...

Hi Guys, Thanks for your input. This was caused to a faulty dsm.sys file. It is all working now. Cheers Dexter