Recent content by aceman

I have a Cisco 801 and a NAS5300 using ISDN DIalers which connect o.k. Problem is that the idle timer gets reset at the remote end o.k. based on an interesting traffic list, but the NAS host end operates seperately and so if an idle timer of 45 mins is set then it disconnects as it sees no...

try phoneboy....theres a perl script that converts the rules/object sinto an html table....

The sho process list needs to be looked at to determine the process which is using the most cpu. In addition if you are worried about access to the router then the security centres around the passwords and if needed an access-list for router access. A reboot of the router clears all buffers...

As far as I can tell the two username passwords for each router do not match. The CHAP PPP process is a three way handshake that transfers the hostnames and the passwords, checks, encrypts and returns the corresponding information for authentication. The passwords do no match so I cannot see...

Can you advise what manufacturer the modem/ta is ? We have a similar problem and it often results in teh TD LED of the modem remaining active, locking out the port. We are using PPP/TACACS and the only ways I have had of getting this resolved is to:- 1. Reset the interface 2. Power cycle the...

The problem lies with the analogue lines which were originally intended soley for voice. Voice is obviouly more "sturdy" in it perception to "echo, broken words, delay, etc." which effect the content of the conversation.Human response to "noise/errors" is to re-ask...

I am unclear how the protocol will operate and the numbers be processed with just a back to back cable ?<br><br>Whilst the pin outs can be arranged so as to allow TX/RX and TIP/No Connection to be crossed there will be no way of processing the SAPI and TEI ?<br><br>On a serial back to back...

May not help, but we have a router connecting to another via an X.25 line and the configs are as follows:-<br><br>interface Serial0<br>&nbsp;description &quot;X.25 9.6Kbps link to Office&quot;<br>&nbsp;ip address xx.xxx.xxx.x 255.255.255.0<br>&nbsp;no ip mroute-cache<br>&nbsp;encapsulation...

I don't use it in the same way but....<br><br>CISCO2511 as Callback Server running TACACS and Win95 PC calling in....<br><br>(2511 router)<br>service exec-callback<br>service timestamps debug datetime localtime<br>service timestamps log datetime localtime<br>service...

The normal default settings for the CON port are 9600 but recently I took a router and attempted to break into it and assumed it had a problem because the NVRAM settings for the Console were 115200. I found this out by testing with all data speeds from 300 upto 115200. I can only assume that at...

I have an 803 which connects via negotiated ip to an ISP and then ultimately connects to the Peer VPN router (a 2611). We chose a 2611 as it has 2 x E0 ports. One port forms the tunnel and the other allows decrypted private addresses to be forwarded onto our network. with a private address. The...