Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by AC2

  1. AC2

    ContactStore showing Incoming calls as Outgoing and not displaying calls with no CLI.

    You need to install Call Record using the Application software with 9.0.
  2. AC2

    Server Edition 8.1 Daylight Savings Time

    I had the same problem. Good fix.
  3. AC2

    Callpilot Mini Software 1.6

    thread1553-1689348 I have corrupt software on a Callpilot Mini 1.6. Does any one have a copy of the software?
  4. AC2

    IPO 500 8.1.65 and ground start trunks

    There is a patch for this.
  5. AC2

    sip trunks between ip office and BCM

    Do you have enough of VCM on the IP Office?
  6. AC2

    IP Office DIG DCPx30 V2 expansion modules wont come up with phones plugged in after shutdown

    Sounds more like the curse of the Avaya and what it did to the Nortel Systems.
  7. AC2

    IP Office Quick mode R7.0.31 analog centrex line issues

    I had the same problem on the same release, but in standard mode. My fix was made changing the Gains to -2.0db Gains: These settings are used to adjust the perceived volume on all calls. · A -> D: Default = 0dB Sets the analog to digital gain applied to the signal received from the trunk by...
  8. AC2

    WinSPM

    Can anyone provide me with the Winspm software?
  9. AC2

    IP DECT Phone is not subscribing

    Make sure to sync the Master Radio under Advance TAb
  10. AC2

    IP412 Upgrade from 4.1.15 to 5.0

    Is there a license needed to upgrade to 5.0 or is it free? Does any one know what would be the upgrade steps to 5.0.
  11. AC2

    IP DECT handsets subscription failed

    Select General, then Provisioning, Uncheck the Enable option, then Press Ok Go to DECT, Set Subscription to Disable from the drop down Menu, Set the Frequency to North American, then Press OK Now go back to General, then Provisioning, check the Enable option, then Press Ok Select Reset, Reset...
  12. AC2

    IP Office with BCM using PRI

    Setup a User Short code to Send Caller ID
  13. AC2

    How to delete a Mailbox on Embedded

    Can anyone assist. I like to know is it possable to delete a mailbox on the IPO with Embedded VoiceMail. I know I can change the name field to create a new mailbox for a new employee. But what happens to all the old Mailbox? Do they just accumulate on the SD Card waiting to fill up the 15 Hours...
  14. AC2

    BCM400 Rel 4.0 Looses Telephony Program on Hard Reboot

    It is Rel 4.0 and was installed about 18 months ago.
  15. AC2

    BCM400 Rel 4.0 Looses Telephony Program on Hard Reboot

    I have had Two BCM that had Lost All Telephony Program on a hard reboot anybody have any ideas why?
See more

Part and Inventory Search

Back
Top