Recent content by abrand88

Hi, Since memory is cheap these days,I would like to upgrade my memory from 1gb to 4gb. I have a Intel 2.4GHZ CPU with 1GB of 512mb sticks-2- for hyper threading. It is 400mhz memory sticks. My IC-7G Abit motherboard is a socket 478, 184 pin memory sticks.According to my bios setup the N/B...

ibmtech65, I solved my problem. Evidently Intel wrote a new driver for Vista operating system called AHCI. When I accessed this entry in Bios, I saw the another entry called IDE. I selected this enry and XP immediately saw the drive and I was able to install XP on the drive. I hope this might...

Since my Acer 5315 has Vista on it, I decided to buy the same hard drive in the Acer laptop. Bios sees the Hitachi drive with exact model number but XP doesn't even recognize that there is a hard drive. I tried using Booting Cd and I was able to format and delete the Linux distro that I...

I am using PClinuxos 2007. My primary drive is the operating system and my external USB hard drive enclosure is where I download any files to. When I boot up my distro it should see my external hard drive but it doesn't mount the drive automatically even though I selected in properties mounting...

Jerry, I now have a serious problem with my motherboard. For a while it posted on and off and now it will not post at all so I have a dead motherboard. I tried the following : 1. I cleared the cmos as per chapter 2- nothing happens when I try and boot up. 2. I changed the power supply and put...

geirendre, I di as you asked. Below is what I got so far. server1@server1:~$ sudo bash root@server1:~# ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1...

Hi, The wireless Atheros chip is a AR5001 chip wireless Network Adapter. I didn't have any luck running the commands you suggested. Below is what happened. Hope this gives you some clues Abrand88 server1@server1:~$ sudo ndiswrapper -i /Desktop/net5523.inf driver net5523 is already installed...

Hi, I am using Ubuntu 7.07 on a separate system. I am using a Engenius EUB-362 EXT module. It connects to a yagi antenna and it is a usb lan driver device. Since I am located within three public hotspots, I am picking up excellent signals. It works flawlessly in Windows but I want it to work...

Greif1, My present yagi is pointed towards my window and I pick up a signal. If I point it down, I won't be getting any signal. Could you please explain to me what you mean ? My present setup is on the second floor but in the front of my house. My basement is two floors down in the back of my...

Hi, I have my access point on the second floor of my house with a Dell GX 110 system. I am using a indoor Yagi antenna supposedly 16 dbi connected to a Engenius Wireless Lan USB adapter model EUB-362 EXT. The output of the 362 goes to a external 7-port USB adapter and the output of the 7-port...

Linney, I plan to re-read the links but I thought of something else. My cantenna is connected to a USB anplifier and then to my USB port. I know I am getting a 15-18 dbi signal using the Cantenna with the output going to the Engenius EUB-362 EXT unit. Would using a router help and stabilize...

For six month now my AP signal has always been 108 mps low signal strength. It is now varying from low to very low but I am still connected. My antenna is a 12dbi cantenna. What can I buy to maintain a constant signal because low signal is just a great connection. I am using a 200mw usb antenna...

Nelviticus, How might I lower the power settings to try your suggestion ? Thanks

I have a 7dbi antenna connected to a Engeniustech usb antenna amplifier High Output Power up to 25dBm EIRP. High Speed Data Rate up to 108 Mbps in Super G mode. This is my access point. all the time I am getting a 12 db signal or 2 or 3 bars when I check the status. A tall building is being...

Hi, Using the USB 7-port device powered worked quite well the USB antenna and outputted the signal into my Adaptec USB card I didn't see any signals dropping with the exception of once. I kept it on over the weekend and this idea worked. I am now interested in increasing the signal strength...