Recent content by aacinit

tlpeter - so i have to walkaround to all the 150 handsets and do this one at a time? that does not sound very practical.

How do I clear all 150 handsets in my organization? also is there a way to control the timing when the screen on the 9608 set dims? Regards

I am doing this for a 9608 phone and the screensaver come on at the time I defined but the jpg file I created does not come up. the jpg is the same size as the original Avaya one 178x59 pixels I have rebooted the phone also. but on reboot the Avaya logo still come up.

Austin Thanks for the prompt reply but since I am newbie to the Avaya system, where is the manager directory? Regards

Guys where can I find the 46XXsettings.txt file? I can see the SD card and can see all the files on it but dont see the 46XXsettings.txt file. Its a ip500v2 system regards

In Exchange 2013 Is it possible to create pre-set message for room resources? For example, if I am creating a meeting request and add a room(which was setup as room resource), I want it to add info about the room(conference bridge phone number and pin) in the meeting request automatically. Any...

I deactivated it from the phone by pressing #2 The user was messing around on the phone menu buttons. Thanks everybody for all the help.

DAVIDPAYNE: I couldnt find the command, by disp feat

DAVIDPAYNE: calls are going to "0" the operator

What are the commands to deactivate from the console?

GENERAL STATUS Administered Type: 8410D Service State: in-service/off-hook Connected Type: 8410D/9410/903Parameter Download: complete Extension: 771 SAC Activated? no Port: 01A0409 User Cntrl Restr: none...

I have a station which is for some reason stuck in Forwarding. we have send all calls button on the phone. which is not on. we *3 to activate and #3 to deactivate. i tried using that on this station but it will not budge. i am stumped, please guide me to a solution. Thanks

I have a Autotapeloader with VXA-320 drive. I bought it after reading all the good reports about it. Now I am thinking I should have never bought it. It is a pain to set it up and the Exabyte/Tandberg tech support people always blame the issues on the backup software. Just make sure you are...

twwabw I used Partition Manager. The expansion on the C:\ drive worked. It took about 6 hours to finish. I saved some space to add to the E:\ drive. It is not working when I try do expand the E:\ drive.

I have a Dell PE2600. Raid Configuration 4X36GB Drives. The server drive cage has 2 more empty slots. I purchased 2 more 36GB hard drives from Dell. This is what I want to do: Add the 2 - 36GB hard rives to the RAID5 array. The C: partition on the RAID 5 is already running out of space. I want...