Recent content by 85235

hi You may confirm whether both master & client can comunicate by using the below UNIX command at server side telnet <client name> bpcd

Hi, I'm using NBU 4.5 netbackup host. When I restore the single compress file over 10G, it prompt "invalid stat size" but if the single file over 100G without compression, the restoration is ok Anybody can help....Many thanks

May be the mapping of drivers are incorrect. I have the same problem after kernel upgrade of media servers since the st.conf has been overwrite....

Hi Is the port is available??

Hi OHWS How about the UNIX command iostat -nxcp 2 |grep rmt

Hi all Any solution to backup mysql db in Linux8.0 platform by using Netbackup V4.5

Hi You can use the below procedure 1. insert the tape to library which need to import 2. run inventory update 3. use command under /usr/openv/netbackup/bin/admincmd/ bpimport -create_db_info -id <media id> 4. search phase 2 import, you can see all the backup history and highlight the image which...

Hi, If you are using flash backup for raw device backup, you may touch one file know as BYPASS_IFR_MAP.<class name> at your client side under /usr/openv/netbackup directory. The file can help you to skip the calculation of backup. Hope it can help you....!!

Hi I have implement a restoration test before server production and encounter some problem as below Hardware configure : Linux Advance Server 2.1 Two hard disk for mirroring with cluster array disk Restoration Procedure - backup the whole system but avoid the mount folder for cluster - power...

Hi You can check the media log whether your tapes are error not under the below directory. /usr/openv/netbackup/db/media/errors

Hi If the drive found &quot;DOWN&quot; quicky after put it UP, you may use &quot;sgscan&quot; to check whether all the drives are invalid or not? may be the SCSI controller found fault to lost the connection...!!

Robtest without problem and my LTO library is connected with a fibre switch directly I feel that the drive cannot find out the tape index and forward to the last of tape when positioning, when it wanted to backward, the drive ejected time out. May be the drive found lower sensitivity I have...

You may add the following line in your bp.conf file REQUIRED_INTERFACE = <your nic host name>

Hi, shieh I have some experience to set the different value and get the following result NUMBER_DATA_BUFFERS / SIZE_DATA_BUFFERS / Result (in MB) 8 / 131072 / backup error with status code 11 16 / 128 / 0.3 4 / 129024 / 10 16 / 129024 / backup error wirh status code 11 8 / 129024 / 8 2 /...

Hi, comtec17 We are running OS Solaris 8.0