Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by 1A2K

  1. 1A2K

    Block Outgoing Caller ID

    I second this that Verizon is full of Bull, we have done this with our Nortel CS1k and it works very well. You just add a Calling Party Privicy activate code. It works perfectly, BTN will not go out. It shows up as Private to the called party. It works well with Verizon, have yet to try this on...
  2. 1A2K

    TTY randomly disables

    I would lean more toward the terminal or device that is connected to it. Like bignose said flow control issue or something odd. If possible I would leave the qsdi port disconnected for a couple of days. Odds are it wont disable. Never had a QSDI port go bad unless lightning was involved
  3. 1A2K

    MatlinPatterson to bid for Nortel

    I had seen an article as to the effect that MattPatterson wasn't looking aquire the Enterprise unit. Week or so back, I just cant find the link now. Who-ever, I just hope they keep the CS1K line alive
  4. 1A2K

    Feature to Block Outbound Caller ID

    Go to load 57 and change the FFC feature code of CPP to something that is usable in your dialing range. We match ours to the commonly used code #57 When you user needs to block outgoing Caller id they will Pick up on a line Dial #57 (if you used that code) Dial the call normally 9+ Number...
  5. 1A2K

    Call Accounting recommendations

    We have just cut over to CUCM 7 and are looking for Call Accouning recommendations. Does any one have Telsoft MegaCall installed and can give it a yea or nea? Thanks for any insights
  6. 1A2K

    SIP To Mitel 3300

    I am having the same issue Between a 5.5 CS1000 and 7 Call Manager. Nortel accepts the call from Cisco But the Callmanager refuses the call from Nortel. Call manager is set for open credentials, something must be missing in our Callmanager programming or it just doesn't play nice with others?
  7. 1A2K

    automatically disabled lines

    Not that this is the best answer but removing 30 from the midnight routine will prevent all digital sets from automatically disabling if they arent connected. It isnt good practice to do this just to forward calls to VM. Using an ACD dn is easy and works quckly, using a phantom is the most...
See more

Part and Inventory Search

Back
Top