Recent content by 126rjp

PLease don't laugh at my question, I am still new to the cisco world... Is it possible to access a local LAN, and its resources, while being connected to another LAN via VPN and accessing those resources? Here is the background, I have an executive who has a small network in his house... a...

Thanks for the reply themut, but I am pretty clueless here, how would I open the ports? would I do it through access lists? sorry, but this is my first experience with cisco...

I am new to cisco, so please be kind to my stupid question. I am trying to access my main office from behind a PIX 501. The main office has a PIX 515 and VPN is working fine for all Cisco vpn clients (version 3.51), except from behind the 501. Both PIX's are running 6.33, and I have nat-t...

Thanks for the help vipergg and baddos, I removed all protocols except ip form most of the workstations, my cpu utilization is 60 - 70%, I moved sc0 from vlan10,(which has all devices in it), to vlan1, and the cpu dropped to 40%. I still have large amounts of broadcast traffic, but the cpu has...

Thanks for the help Baddos, I wish I knew why they don't want them, I have suggested more then once, but they are against it. The dhcp scope is set low only 3days... I will look into DNS and WINS.. do you know of anything I should specifically look for?

I have a flat network, 3 switches, a 4006 uplinked to both a 6509 and another 4006. My problem is that the cpu utilization is over 50% on the 4006. I have only one vlan, and everyone is in it, I know multiple vlans would help, but management is agenst it. I also have EXTREMELY high broadcast...

I have been thrown into a position I know VERY little about, I need to set up a PIX 501. Here is my set up Internet -- Cable Modem (issues a dhcp address)-- PIX 501 -- local lan. I need to have the users on this local lan, with the cisco vpn client 3.51 connect to the main office, which has...