Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fix upgrade failure when using SD card that was formatted/recreated using Windows 10

AVAYA: IPO Office FAQ

Fix upgrade failure when using SD card that was formatted/recreated using Windows 10

by  Ivan917  Posted    (Edited  )
I noticed Windows 10 was adding a "system volume" folder to the sd card when a format/recreate was done. For some reason this prevented a IPO 9.1 upgrade to upgrade the control unit. Once I stopped Windows 10 from doing that I was able to upgrade via format/recreate. I do not know if this fix works for other releases of IPO but I suspect it would. Here is how I resolved the issue...

Type gpedit.msc in the search box in the Windows 10 taskbar.
Go to Computer Configuration, Administrative Template, All Settings.
Scroll down until you see "Do not allow locations on removable drives to be added to libraries."
Double click then check "Enabled"
Click "Apply" and then "OK"
Close the Policy Manager and reboot the computer.

http://www.tek-tips.com/viewthread.cfm?qid=1753146
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top