Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do you place DSS keys on first 16 feature keys?

DSS One Touch Keys on Dterm

How do you place DSS keys on first 16 feature keys?

by  pave35  Posted    (Edited  )
DSS/BLF on Dterm feature keys.
1. First released 1800 series software IVS.
2. Feature is ONLY available on 2,4,8, and 16 button sets ONLY!!! 32 button sets have their designated one touch keys.
3. Feature is only available on Series E and Series I sets.
4. CM 73 and CM 94 for the Station MUST match.
5. The CM 73 and 94 memory assignment must be unique to each station using the feature.
6. The spd bin number must match the key number of the station. E.g. spd bin 3 (F1103)on key 03 of Dterm.
7. The lead digit of the station recorded under a key must = a station in the numbering plan at the time of assignment and not LCR. E.g. CM 200>2>A129 change to 804 then program station 2XXX under the DSS/BLF key before changing 2 back to 200>2>A129.
8. The station recorded under the spd bin/key must not have duplicate bins on the same station or BLF will not work. E.g if station 2000 is recorded under bin/key 3 it must not be placed under any other bin/key within the memory for that station.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top